User manual SONY HT-DDW750

[. . . ] 4-244-183-12(1) Home Theater System Operating Instructions Owner's Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. HT-DDW750 © 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. [. . . ] See the tables on back page for the parameters available in each sound field. L R BAL. L/R XX BALANCE 0 dB 0 dB 0 dB 0 dB OFF STD CTR XXX dB SUR. L. XXX To get the most from multi channel surround sound Position your speakers and do the procedures described in "Multi channel surround setup" starting from page 14 before you customize a sound field. 26GB Front balance ( L R BAL. L/R XX) Lets you adjust the balance between front left and right speakers. Center level (CTR XXX dB) Adjusting the tone parameters The TONE menu contains parameters that lets you adjust the tone of the front speakers for optimum sound. The settings are applied to all sound fields. Lets you adjust the level of the center speaker. Surround left level (SUR. L. XXX dB) Lets you adjust the level of the surround left speaker. Surround right level (SUR. R. XXX dB) 1 Start playing a program source encoded with multi channel surround sound. Lets you adjust the level of the surround right speaker. Sub woofer level (S. W. XXX dB) 2 Press MAIN MENU repeatedly to select " TONE ". 3 Press MENU Enjoying Surround Sound or MENU to select the parameter you want to adjust. setting you want. Lets you adjust the level of the sub woofer. Dynamic range compressor ( COMP. RANGE 4 Press MENU + or MENU ­ to select the The setting is stored automatically. Initial settings Parameter Initial setting Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. We recommend using the "MAX" setting. · To reproduce the sound track with no compression, select "OFF". · To reproduce the sound track with the dynamic range intended by the recording engineer, select "STD". · To reproduce a dramatic compression of the dynamic range, select "MAX". Note BASS XX dB TREB. XX dB 0 dB 0 dB Bass (BASS XX dB) Lets you adjust the bass tone. Treble (TREB. XX dB) Lets you adjust the treble tone. Note Dynamic range compression is possible with Dolby Digital sources only. Effect level (EFCT. XXX) When you use the Micro Satellite Speakers or other small speakers, adjust LEVEL on the subwoofer (page 19) to reinforce the bass. Lets you adjust the "presence" of the current surround effect. Resetting customized sound fields to the factory settings 1 If the power is on, press ?/1 to turn off the power. 2 Hold down 2CH and press ?/1. "SF. CLR. " appears in the display and all sound fields are reset at once. 27GB Receiving Broadcasts Notes Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Storing FM stations automatically (AUTOBETICAL) (Models of area code CEL, CEK only) · Do not press any button on the receiver or supplied remote during autobetical operation. · If you move to another area, repeat this procedure to store stations in your new area. · For details on tuning the stored stations, see page 30. · If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. Direct tuning You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote. [. . . ] 270 × 325 × 398 mm (10 3/4 × 12 7/8 × 15 3/4 inches) including front panel Approx. 10. 0 kg (22 lb 1 oz) Mass SA-WMSP75 SA-WMSP85 continued 49GB Specifications (continued) Supplied accessories FM wire antenna (1) AM loop antenna (1) Speaker connecting cord, long (2) Speaker connecting cord, short (3) Monaural connecting cord (1 phono to 1 phono) (1) Coaxial digital cord (1) Foot pads (speakers) (20) Foot pads (subwoofer) (4) Remote commander (1) R6 (size -AA) batteries (2) Speakers · Front speakers (2) Models of area code CEL, CEK only (SS-MSP2) Models of other area code (SS-MSP75) · Center speaker (1) Models of area code CEL, CEK only (SS-CNP2) Models of other area code (SS-CNP75) · Surround speakers (2) Models of area code CEL, CEK only (SS-MSP2) Models of other area code (SS-MSP75) · Sub woofer (1) Models of area code U, CA only (SA-WMSP75) Models of other area code (SA-WMSP85) For details on the area code of the component you are using, see page 4. Design and specifications are subject to change without notice. 50GB Tables of settings using the MAIN MENU button You can make various settings using the MAIN MENU, MENU / tables below show each of the settings that these buttons can make. Press MAIN MENU repeatedly to select Press MENU to select L R and MENU +/­ buttons. The or MENU Press MENU + or MENU ­ to select Page LEVEL BAL. [. . . ]