User manual SONY HT-DV1

[. . . ] DVD STEREO SYSTEM SISTEMA ESTÉREO PARA DISCOS DVD HT-DV1 OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES Owner's record For your convenience, record the model number and serial number (you will find them on the bottom of your set) in the space provided below. Please refer to them when you contact your Aiwa dealer in case of difficulty. (Lot No. ) En (English) E (Español) For assistance and information, call toll free 1-800-BUY-AIWA. (United States and Puerto Rico) 8C-AV5-903-01 011217AMK-H9 U ENGLISH WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. - Do not place the system on a bed, rug, or similar surface that may block the ventilation openings. [. . . ] Alternatively, press TONE DEFEAT on the amplifier to select "OFF". En CONTINUE ENGLISH 21 PLAYBACK (CONTINUED) Creating a simulated audio surround effect The system provides three audio surround modes that you can select when listening to two-channel sources. Each time the button is pressed, the audio surround mode changes as follows: HALL STADIUM SURROUND LIVE OFF SURROUND HALL: produces a surround effect as if you were in a concert hall. STADIUM: the reverberation time is much delayed to produce an echo effect as if you were in a large stadium. LIVE: the reverberation time is relatively short so that you can feel as though you were in a small music hall. OFF (no indication): turns off the audio surround effect. NOTES · The audio surround effect only functions when the SURROUND L/R speakers are connected to the system. · With some discs, the audio surround effect may not work or may even produce an adverse acoustic effect on sound reproduction. In this case, turn off the audio surround effect. 22 ENGLISH Basic operation of the On-Screen Display (OSD) menu BASIC OPERATIONS 4 Number buttons Press i/k repeatedly to select the desired setting. The number buttons can also be used for entering numbers (e. g. title number). DISPLAY i/k/j/l ENTER 5 Press ENTER. PLAY MODE The new setting is confirmed. Some menu items require further settings. In such a case repeat steps 4 and 5. vRETURN To return to the previous menu screen Press vRETURN or j. To turn off the OSD menu Press DISPLAY. You can check the general playback status, change the play mode or locate a desired point on the disc, etc. by displaying and operating the OSD menu. When playing an audio CD, the OSD menu is displayed without pressing DISPLAY allowing you to skip step 1 below. Tip About the PLAY MODE button The PLAY MODE button can also be used instead of DISPLAY to display the following OSD menu items: TITLE/ TRACK, CHAPTER, TIME, REPEAT and PROGRAM. 1 Press DISPLAY. To display the OSD menu using the PLAY MODE button Press PLAY MODE, then follow steps 3 through 5 above. If you do not press i/k within 10 seconds after pressing PLAY MODE, the OSD menu disappears and the operation is canceled. To turn off the OSD menu, press PLAY MODE again. The 1st (partial) display or 2nd (full) display of the OSD menu appears on the TV screen. b Go to step 2 if you want to display the 2nd (full) OSD menu. The menu items differ depending on the disc type. See "Example On-Screen Display (OSD) menu" on page 24. 2 En Press i/k repeatedly to move the cursor (blue area) to the top or bottom item of the 1st (partial) OSD menu, then press i/k again. The 2nd (full) display of the OSD menu appears on the TV screen. 3 Press i/k repeatedly to select the desired menu item, then press ENTER or the l right cursor button. The symbol will be displayed if you press ENTER or the l right cursor button at a menu item whose operation is prohibited. CONTINUE ENGLISH 23 PLAYBACK (CONTINUED) Example On-Screen Display (OSD) menu (fully displayed) TITLE 01 / 10 CHAPTER 1 / 2 TIME TITLE 0 : 01 : 47 DolbyDigital AUDIO 2 / 3 SUBTITLE ANGLE REPEAT OFF ZOOM MARK TRACK 03 / 11 TIME TRACK 0 : 09 : 16 AUDIO STEREO REPEAT OFF PROGRAM OFF ZOOM MARK NOTE TRACK 01 / 10 TIME TRACK 0 : 01 : 58 AUDIO STEREO REPEAT OFF PROGRAM OFF When playing a video CD with PBC on, the status/setting fields of the TRACK, TIME, REPEAT, PROGRAM and MARK menu items are blank (no indication). Description of each OSD menu item Each menu item shows its current status/setting, which can be changed in the OSD menu. For details of the functions or optional settings, refer to the pages in parentheses. First (partial) display Menu item TITLE CHAPTER TIME Status/setting · Title number/total number of titles · Total number of titles in stop mode (resume off) Chapter number/total number of chapters Elapsed time or remaining time of title/chapter Function Skip to the desired title. (Title search on page 26) Skip to the desired chapter. (Chapter search on page 27) Skip to the desired time point. [. . . ] The following situations may be caused by information on the disc itself. · The audio or subtitles are not reproduced in the language specified in the setup menu. · The audio track or subtitles cannot be changed. The DVD menu is not displayed in the language you want. [. . . ]