User manual SONY HT-DV2300

[. . . ] AV SURROUND RECEIVER RECEPTOR CON SISTEMA DE SONIDO PERIMÉTRICO PARA AUDIO-VÍDEO RECEPTEUR AV SURROUND AV-NW30 AV-NW31 (for HT-NW300, HT-DV2300) OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI En (English) E (Español) F (Français) Owner's record For your convenience, record the model number and serial number (you will find them on the rear of your unit) in the space provided below. Please refer to them when you contact your Aiwa dealer in case of difficulty. (Lot No. ) For assistance and information call toll free 1-800-BUY-AIWA (United States and Puerto Rico) 8C-AR6-903-21 020615CCK-H-S U ENGLISH WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Portable cart - An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. [. . . ] Adjust from 0 (minimum) to 49 and MAX (maximum). Volume level setting is retained during power-off standby. If the unit is turned off with the volume set to 21 or higher, it is automatically turned down to 20 the next time the unit is turned on. The DSP (Digital Signal Processor) surround circuits can recreate the effect of sounds reflected from walls or ceilings, to obtain the sound presence of real environments. The unit provides 5 DSP preset modes. 1 Press DSP. 2 Within 6 seconds, turn MULTI JOG to select the desired DSP mode. The "DSP" and "S" (surround speakers) indicators light up. DISCO HALL LIVE CHURCH MOVIE Left and right balance of the front and surround speakers 1 Press BALANCE repeatedly. "L/R 0dB" and "LS/RS 0dB*" appear alternately. "L/R 0dB" means that the left and right front speakers level is the same. "LS/RS 0dB*" means that the left and right surround speakers level is the same. * This is not displayed in stereo mode (SURROUND off or DSP off) or when the surround speakers are set to "NONE". 2 Turn MULTI JOG (press JOG +, - repeatedly). Example: "L>R 5dB" means that the left front speaker level is 5 dB higher than that of the right front speaker. "LS<RS 10dB" means that the right surround speaker level is 10 dB higher than that of the left surround speaker. NOTE · The adjustable level ranges from 0 to 10 dB. · The surround speaker balance can be adjusted only when SURROUND or DSP is set to on and the surround speakers are not set to "NONE". When the music source is monaural The DSP system may not work effectively depending on the DSP mode selected. En To cancel the selected mode Press DSP to display the DSP mode name, and press the button again within 6 seconds. "DSP OFF" appears on the display. To select with the remote control 1 Press DSP. 2 Within 6 seconds, press JOG + or - repeatedly until the desired DSP mode is displayed. NOTE · DSP cannot be turned on when the surround speakers are set to "NONE". · DSP is automatically canceled when SURROUND is turned on, and vice versa. Muting the sound temporarily Press MUTING so that "MUTE ON" appears on the display. To return to the previous volume level, press MUTING again. To reset the volume and balance to the default value, press and hold BALANCE until "LVL RESET" is displayed. All the speaker volume as well as the left and right balance of the front and surround speakers are reset to the default value (0 dB). SOUND ADJUSTMENT DURING RECORDING The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording. BASS AND TREBLE Turn BASS or TREBLE. The adjustable level for the bass sound and the treble sound ranges from ­10 to +10 dB at 2 dB steps. Adjusting bass and treble with the remote control 1 Press TONE repeatedly to select BASS or TREBLE. [. . . ] If the power cannot be turned off in step 1 because of a malfunction, disconnect the AC cord, and reconnect the AC cord after several seconds. Then carry out step 2. ENGLISH 17 GENERAL SPECIFICATIONS FM tuner section Tuning range Usable sensitivity (IHF) Antenna terminal 87. 5 MHz to 108 MHz 13. 2 dBf 75 ohms (unbalanced) Outputs AM tuner section Tuning range Usable sensitivity Antenna 530 kHz to 1710 kHz (10 kHz step) 531 kHz to 1602 kHz (9 kHz step) 350 µV/m Loop antenna Muting AUDIO OUT VIDEO 1/MD: 350 mV (1 kohm) TAPE: 350 mV (1 kohm) VIDEO OUT VIDEO 1/MD: 1 Vp-p (75 ohm) MONITOR: 1 Vp-p (75 ohm) SUB WOOFER: 4. 0 V FRONT SPEAKERS: accept speakers of 8 ohms or more. SURROUND SPEAKERS: accept speakers of 8 ohms or more. CENTER SPEAKER: accept speaker of 8 ohms or more. [. . . ]