User manual SONY HVL-IRM

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] ⷠDo not pick up the camera by the head of the battery IR light. ⷠRemove the battery IR light and shoe bracket before putting the camera into a carrying case. ⷠAvoid placing or storing the battery IR light in locations that are ­ Extremely hot such as in a car parked in the sun ­ In areas subject to direct sunlight or sources of high temperature, such a heating device ­ Vibrating · Remove the battery pack after using or when carrying the battery IR light. Store in pouch after making sure that the unit is cool enough to handle. Clean the battery IR light with a dry soft cloth. You can remove stubborn stains with a cloth lightly dampered with a mild detergent solution, then dry the unit with a soft cloth. Never use strong solvents, such as thinner or benzine, since these will damage the finish on the surface. 90 g (3 oz) Accessories (supplied) shoe bracket (1) Operating instructions (1) Dimensions Design and specifications are subject to change without notice. The rechargeable battery pack is to be set at the behind of the battery IR light, and it is indicated as the BATT- . While sliding the BATT RELEASE button on the battery IR light, slide out the battery in the direction of the arrow. B Using with the dry batteries The dry batteries are to be set inside of the battery IR light, and they are indicated as the BATT- . 3 Insert both of the size LR6 (AA) batteries with correct polarity. [. . . ] The picture recorded with the IR light is nearly monochrome. ⷠIR light is invisible because it is infrared lighting. [. . . ]