User manual SONY HVL-LBPA

[. . . ] Instead it shall be handed over to the applicable take-back scheme for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Sony office or visit Sony Europe's web site for business customers: http://www. [. . . ] You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This Class B digital apparatus complies with Canadian ICES-003. This product with the CE marking complies with both the EMC Directive (89/336/ EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European standards: · eN55103-1 :Electromagnetic Interference (Emission) · EN55103-2 :Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors) and E4 (controlled EMC environment ex. Attaching the battery pack to the video light directly (See illustration B. ) · Attaching the battery pack to the video light with the battery adaptor cord (See illustration C. The battery adaptor cord can only be used with the video light. ⷠWhen using the video light with the battery pack attached to the adaptor cord, the continuous lighting time will be about 10% shorter than when using it with the battery pack attached to the video light directly. ⷠWhen moving the battery adaptor cord its battery mount fixed with a holding band etc. , be careful not to pull down the video camera and tripod with the cord. )) (1) Color conversion filter (1) Set of printed documentation Design and specifications are subject to change without notice. Do not attach the video light to the video camera with an intelligent accessory shoe. Doing so may cause the accessory shoe to damage. HVL-LBPA The "InfoLITHIUM" is a lithium ion battery pack which can exchange data about its battery consumption with compatible electronic equipment. Sony recommends that you use the "InfoLITHIUM" battery pack with electronic equipment having the logo. The HVL-LBPA is a video light that uses a high-brightness white LED as its lens light source. ⷠThe video light can be set to two color temperature, namely 5, 500 K or 3, 200 K (when using the supplied color conversion filter). ⷠThe white LED has a long lifetime of about 10, 000 hours along with impactresistance and weather-resistance qualities, and so requires almost no maintenance. ⷠWhen the video light is attached to the video camera, the weight of the video camera and load on the arms is reduced by using the battery adaptor cord. 1 Loosen the light attachment knob on the video light toward RELEASE to retract the screw. 2 Attach the video light to the accessory shoe on the video camera. 3 Tighten the light attachment knob on the video light toward LOCK to fix the video camera. [. . . ] 2 Insert the convex screw into the video light and turn the video light in the clockwise direction. 1 Loosen the lighting angle adjusting screw (coin screw) with a coin and adjust the angle of the video light. 2 Tighten the lighting angle adjusting screw (coin screw) firmly to fix the angle of the video light. notes When adjusting the angle of the video light, hold the video light body firmly while loosening the lighting angle adjusting screw (coin screw). [. . . ]