User manual SONY HWS-BTA2W

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Example Computer or other stereo audio source device This unit Note For details on how to operate the devices to be connected, refer to the operating instructions supplied with each device. Connect the headphone jack of a stereo audio source device to the AUDIO IN jack of this unit with the supplied connecting cable. Note Be sure to connect this unit to the headphone jack of the stereo audio source device to be connected. If this unit is connected to the LINE OUT jack of the device to be connected, sound may be distorted. If the stereo audio source device has switching between headphone and LINE OUT on the same jack, use the headphone setting. 5 V jack AC power adaptor (supplied) When using this unit in a car, use the Car Battery Cord DCC-E345 (optional). " ­ This unit is connected to a power source and the 1 indicator (green) goes off. When the 1 indicator (green) and indicator (blue) start flashing together, release the button. Note Pairing mode is cancelled and this unit is turned off after about 5 minutes. If this unit is turned off while performing the procedure, start over from step 1. This unit tries to connect the BLUETOOTH stereo audio receiving device soon after detecting it. When the BLUETOOTH connection is made properly, both the 1 indicator (green) and indicator (blue) light up, indicating pairing is complete, and pairing information is memorized on this unit. notes · When pairing, be sure to place both the BLUETOOTH devices within 1 m (3 ft) of each other. ⷠPasscode of this unit is fixed to "0000. " When using this unit as a transmitter, this unit cannot be paired with a BLUETOOTH stereo audio receiving device whose Passcode is not "0000. " * Passcode may be called "Passkey, " "PIN code, " "PIN number, " or "Password. If pairing is not complete Start over from step 1. Tip To pair with other BLUETOOTH devices, repeat steps 1 to 2 for each device. Note BLUETOOTH connection may be made on some devices automatically when pairing is complete. In such indicator (blue) light up, indicating that the a case, both the 1 indicator (green) and the BLUETOOTH connection has been made. Press the 1 button to turn on this unit. Prepare the BLUETOOTH stereo audio receiving device to be connected within 5 minutes after turning on this unit. [. . . ] , Check that BLUETOOTH connection is made properly between this unit and the BLUETOOTH stereo audio receiving device. , Turn up the volume of the stereo audio source device as high as possible to the extent that sound is not distorted. , Turn up the volume of the BLUETOOTH stereo audio source device as high as possible to the extent that sound is not distorted. , Turn up the volume of the stereo audio source device as high as possible to the extent that sound is not distorted. [. . . ]