User manual SONY ICD-AX412F

[. . . ] 4-265-824-11(2) IC Recorder Operating Instructions Getting Started Basic Operations Other Recording Operations Other Playback Operations Editing Files Listening to the FM Radio About the Menu Function Utilizing Your Computer Additional Information Troubleshooting ICD-AX412F To prevent possible hearing damage, do not listen at high volume levels for long periods. WARNING Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. RATED CURRENT CONSUMPTION: 800 mA Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0. 0005% mercury or 0. 004% lead. [. . . ] Scans automatically for available frequencies. YES: The automatic presetting is executed. NO: The automatic presetting is canceled. 71 74 87 GB Menu items DX/LOCAL Settings (*: Initial setting) Sets the receiver sensitivity when listening to the FM radio. LOCAL: When there is interference or collapsing caused by a intense electric field around the transmitting antenna of the broadcasting station, etc. , select this setting. See page 76 P Note Select "DX" when the IC recorder reception status is not good due to a weak signal. Scan Sensitivity Sets the scanning sensitivity when presetting FM radio stations. High*: The scanning sensitivity is set to high (displayed as "SCAN H" in the window). Low: The scanning sensitivity is set to low (displayed as "SCAN L" in the window). During FM reception or recording, switches between the sound from the speaker and the sound from the headphones. Headphones*: The sound comes out from the headphones. Speaker: The sound comes out from the speaker(s). 77 Audio Output 78 88 GB Menu items Detail Menu REC Mode Settings (*: Initial setting) Sets the recording mode including sound quality. 192kbps*: Stereo recording mode (displayed as "ST" in the window) 128kbps: Stereo standard play recording mode (displayed as "STSP" in the window) 48kbps(MONO): Monaural standard play recording mode (displayed as "SP" in the window) 8kbps(MONO): Monaural long play recording mode (displayed as "LP" in the window) Sets the microphone sensitivity. High: To record a sound far away from the IC recorder or a low sound, such as recording in a spacious room (displayed as " " in the window). Medium*: To record the sound of a normal conversation or meeting, such as recording in a meeting space or during interview (displayed as " " in the window). Low: To record dictation with a microphone in front of your mouth, a sound near the IC recorder, or a loud sound (displayed as " " in the window). See page ­ Mic Sensitivity ­ About the Menu Function P Note During FM recording (page 73), the Mic Sensitivity setting is disabled. 89 GB Menu items Detail Menu LCF(Low Cut) Settings (*: Initial setting) Sets the LCF (Low Cut Filter) function to cut a low frequency to reduce the roaring noise from wind; therefore you can record a file more clearly. OFF*: The LCF function is canceled. See page ­ P Note During FM recording (page 73), the LCF function does not work. Select Input Selects the external input to be recorded that is connected to the m (microphone) jack. MIC IN*: Select when you record files using an external microphone. Audio IN: Select when you record using other equipment. 45, 46 Continuous Play Sets the continuous playback mode. ON: Files in one folder are played back continuously. [. . . ] File location indicator The selected file number is displayed in the numerator and the total number of files in the folder is displayed in the denominator. Track mark indicator Displays the track mark number just before the current position. Appears when a track mark is set for a file. LCF (Low Cut Filter) indicator Appears when "LCF(Low Cut)" is set to "ON" in the menu. [. . . ]