User manual SONY ICD-B15

[. . . ] The model number is located at the rear and the serial number is located inside the battery compartment. record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] While playing back a message, you can set the start (A) and end (B) points for a section you wish to play repeatedly. The starting point (A) of the section you wish to play repeatedly is set. You cannot set A-B Repeat for a section that overlaps two or more messages. â· If you do not set the finishing point (B), the finishing point is automatically set at the end (or the beginning) of the message. Note that once a recording has been erased, you cannot retrieve it. When a message is erased, the remaining messages will advance and renumbered so that there will be no space between messages. Before erasing Message 1 Message 2 Message 3 Message 4 Message 5 Erase Message 3 After erasing Message 1 Message 2 Message 3 Message 4 Remaining messages are renumbered. 1 Press ERASE while playing back the message you want to erase or press ERASE for more than 1 second during stop mode. A beep will sound and the message number and "ERASE" will flash while the first and last 5 seconds of the message are played back 10 times. 2 Press ERASE while the message is being played back. the message is erased and the remaining messages will be renumbered. (For example, if you erase Message 3, Message 4 will be renumbered as Message 3. When erasing is completed, the unit will stop at the beginning of the following message. First divide the message by adding an index (see page 23) and then follow the steps on page 19 to erase the message. You can add a recording to the message being played back. Meeting at 2 o'clock on December 1. During playback, press zREC/STOP for more than 1 second. The move function does not duplicate a message in another folder. When you move a message to another folder, the one in the previous folder will be deleted. The timer cannot be set if the clock has not been set . "START" is displayed for one second, and then "DATE" will flash in the display window. 3 Select the month and day digits in the same way. [. . . ] You set the alarm or time recording when the time is already past. You cannot erase an index to combine messages of different modes. â· The selected folder does not have any messages. If you do not set date and time, you cannot make alarm or time recording setting. [. . . ]