User manual SONY ICD-BM1B

[. . . ] IC Recorder Operating Instructions Owner's Record The model number and the serial number are located on the back of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ICD-BM1A/BM1AVTP Serial No. ICD-BM1A/BM1AVTP ©2006 Sony Corporation For the customers in the United States For the customers in the United States INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When there are 3 messages in a folder Editing Messages Message 1 Message 2 Message 3 Note You can also add priority mark(s) using the supplied "Digital Voice Editor" software. But messages are not sorted in order of the number of the priority marks unless you sorted by the number of priority marks using the software. 37GB Labeling Folders Folders are labeled automatically with names modeled on "FOLDER01", but you can use the template names to label folders. 1 Tip You can also label folder or messages using the supplied "Digital Voice Editor" software. For more information, see online help. MENU FOLDER ENTER CANCEL Jog lever (>/. ) 1 2 Press MENU. The menu mode will be displayed. Press the jog lever up or down (>/ . ) to select "FOLDER NAME, " and then press ENTER. The folder name input window will be displayed. You can select the folder name from the following templates: ACTION, APPOINTMNT (appointment), DICTATION, E-MAIL, FOLLOW-UP, LECTURES, LETTERS, MEETINGS, MEMOS, NOTES, PERSONAL, REPORTS, SCHEDULE, TO DO, TRAVEL, OTHERS 3 4 Press the jog lever up or down (>/. ) to select a template name and press ENTER to set the name. Press MENU to exit the menu mode. The window will return to the normal display. To cancel labeling Press CANCEL before step 3. 38GB BOther Functions Adjusting the Playback Speed -- DPC (Digital Pitch Control) You can adjust the speed of the playback between twice the normal speed (+100%) and half the normal speed (­50%). The message is played back in natural tone thanks to the digital processing function. MENU ENTER CANCEL Jog lever (>/. ) DPC Playing back a message rapidly or slowly Slide DPC to ON. "FAST PLAY" or "SLOW PLAY" flashes for 3 seconds and the message is played back at the speed you specified with the menu. To resume normal playback Slide the DPC switch to OFF. Other Functions Setting the playback speed You can set the playback speed when the DPC switch is set to ON. The setting for the playback speed holds effective until you change the setting. 1 Press MENU. The menu mode will be displayed. Continued 39GB Adjusting the Playback Speed -- DPC (Digital Pitch Control) (continued) 2 Press the jog lever up or down (>/ . ) to select "DPC". The current playback speed setting is displayed in percentage with the standard speed as "0%". 3 Press ENTER. The playback speed setting mode will be displayed. To return to the previous step, press CANCEL. 4 Press the jog lever up or down (>/ . ) to set the playback speed. · Fast play (up to +100% in increments of 10%): Press up (>). · Slow play (down to ­50% in decrements of 5%): Press down (. ). 5 Press ENTER. The specified playback speed is confirmed. 6 Press MENU to exit the menu mode. The normal display appears. 40GB Setting the Overwrite Mode You can select the overwrite mode when you add an overwrite recording to a previously recorded message. MENU ENTER CANCEL Jog lever (>/. ) 1 2 Press MENU. The menu mode will be displayed. Press the jog lever up or down (>/ . ) to select "OVER WT" (overwrite), then press ENTER. The overwrite mode selection window is displayed. Other Functions · OVER: The portion left after the overwrite recording will remain in the message. Starting point of the overwrite recording Message 1 Stopping point for the overwrite recording The remaining portion in Message 2 Message 3 Message 2 Message 1 Message 2 Message 3 Added overwrite recording in Message 2 Continued 41GB Setting the Overwrite Mode (continued) ·CUT: The portion left after the overwrite recording will be deleted. Starting point of the overwrite Stopping point for the overwrite recording The remaining portion in Message 2 recording Message 1 Message 2 Message 3 Message 1 Message 2 Message 3 Added overwrite recording in Message 2 3 4 Press the jog lever up or down (>/ . ) to select "OVER" or "CUT", then press ENTER. Press MENU to exit the menu mode. The normal display appears. When you add an overwrite recording (page 15), the recording will be added in the selected overwrite mode. To cancel setting Press CANCEL. The window returns to that of the previous step. 42GB Playing Back a Message at a Desired Time with an Alarm You can sound an alarm and start playback of a selected message at a desired time. You can have the message played back at a specified date, once every week, or the same time everyday. You can also sound the alarm without playing back a message. Note When the clock is not set or no messages are recorded, you cannot set the alarm. MENU ENTER CANCEL Jog lever (>/. ) 1 Other Functions Select the message you want to play back. For more information about selecting the desired message, see step 1 and 2 of "Playing Back Messages" on page 20. 2 Enter the alarm setting mode. 1 Press MENU. The menu mode will be displayed in the display window. 2 Press the jog lever up or down (>/ . ) to select "ALARM OFF". If the alarm has been already set to "ON", "ALARM ON" will be displayed. The alarm setting mode will be displayed in the display window. Continued 43GB Playing Back a Message at a Desired Time with an Alarm (continued) 4 Press the jog lever up or down (>/ . ) to select "ON". [. . . ] 23, Erase, folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Erase, messages . . . . . . . . . . . . . . . . . . . . . . . . . . Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 34 28 59 18 Continued 67GB Index (continued) N NEW FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]