User manual SONY ICD-BP150

[. . . ] 3-240-358-12 (1) IC Recorder Operating Instructions Owner's Record The model number is located at the rear and the serial number is located inside the battery compartment. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ICD-BP150 Serial No. ICD-BP150 2002 Sony Corporation For the customers in the United States INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] · If more than one alarm time comes during recording, only the first message will be played back. · When the alarm time comes when the unit is in the menu mode, alarm will sound and the menu mode will be cancelled. · If you erase the message you set the alarm to play back, the alarm setting will be cancelled. · If you add an index to the message you set the alarm to play back, playback will stop at the index. · If you erase the index on the message you set the alarm to play back, the alarm setting will be cancelled. · You can adjust the playback volume with the VOL control. · If the alarm time comes during erasing, alarm will sound for 10 seconds after the erasing is finished and playback begins. · Alarm setting will not be cancelled when the alarm playback finishes. To cancel alarm setting, see above. Other Functions 37GB Preventing Accidental Operation -- HOLD function HOLD switch Slide the HOLD switch in the direction of the arrow. "HOLD" will flash three times, indicating that all the functions of the buttons are locked. To cancel the HOLD function, simply slide the HOLD switch in the opposite direction. Note When the HOLD function is activated during recording, cancel the HOLD function first to stop recording. 1 Tip Even if the HOLD function is activated, you can stop the alarm playback. To stop the alarm or playback, press xSTOP. 38GB Selecting the Display Mode You can select the display mode for the stop, recording and playback modes. (If the unit is left unoperated for more than 3 seconds in the stop mode, the display will show the current time, regardless of the display mode setting. ) Each time you press DISPLAY, the display mode will change as shown below: DISPLAY Counter: Elapsed playback/ recording time in one message , Remaining recording time: The remaining recording time is displayed during recording or in stop mode. During playback, the remaining time of the message is displayed. M Recorded time: The date and time the current message was recorded. (If the clock has not been set, "- -:- -" will be displayed. ) m < Recorded date: The date the current message was recorded. (If the clock has not been set, "- -Y- -M- -D" will be displayed. ) Other Functions 39GB Menu map Press MENU to enter the menu mode. DATE SUN MON TUE ON MODE SP LP TIMER OFF ON BEEP ON OFF CONT OFF ON EASY-S OFF ON SET DATE Year Month Set date Set time B-PLAY B-ONLY ALARM OFF WED THU FRI SAT DAILY DATE SUN MON TUE WED THU FRI SAT DAILY Day Hour Minute Set date Set start time Set end time SP LP : : : Initial setting Press NxPLAY/STOP to go to the next step. or > to select. 40GB Changing the Settings Follow the menu map on page 40. 1 Press MENU to enter the menu mode. or > to select the item and press Nx PLAY/STOP. or > to select the mode and press Nx PLAY/STOP to fix the setting. z Alarm setting (ALARM) See page 35. z Timer recording (TIMER) See page 32. z Recording mode (MODE) SP: You can record for up to 127 minutes with better sound. LP: You can record for up to 339 minutes. z Beep sound (BEEP) BEEP ON: A beep will sound to indicate that operation has been accepted. [. . . ] 42 U Uninstall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 USB connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 O Overwrite recording . . . . . . . . . . . . . . . . . . . . . 25 V Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]