User manual SONY ICD-BX700

[. . . ] NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC. For the customers in the United States The following FCC statement applies only to the version of this model manufactured for sale in the USA. [. . . ] playback and at the same time set the connected equipment to the recording mode. A message from the IC recorder will be recorded on the equipment connected. Note 2 Press PLAY/STOP·ENTER to start Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information. Tip Before you start recording, we recommend you to make trial recording first. 3 Press (stop) on the IC recorder and the connected equipment at the same time to stop recording. GB Playing Back a Message at a Desired Time with an Alarm 1 Select the message you want to play back with an alarm. 2 Enter the alarm setting mode. Press and hold DISPLAY/MENU to DISPLAY/ MENU enter the menu mode. Press ­ or + to select "ALARM, " then press PLAY/STOP·ENTER. (If the alarm has already set to the selected message, "ALARM ON" is displayed. If you do not wish to change the setting, press (stop) and exit the menu mode. ) Playback ­, + PLAY/ STOP· ENTER You can sound an alarm and start playback of a selected message at a desired time. You can have the message played back on a specified date, once every week, or at the same time every day. Note "ALARM OFF (or ON)" will not appear and the alarm cannot be set if the clock has not been set or no message has been recorded in the selected folder. GB Press ­ or + to select "ON, " then press PLAY/STOP·ENTER. 4 Press ­ or + to select the alarm sound either from "B-ONLY" or "B-PLAY, " then press PLAY/ STOP·ENTER. 3 Set the alarm date and time. Press ­ or + to select "DATE, " a day of the week, or "DAILY, " then press PLAY/STOP·ENTER. When you select "DATE": Set the year, month, day, hour, and minute in sequence, as described in "Step 2: Setting the Clock" on page 14, then press PLAY/STOP·ENTER. When you select a day of the week or "DAILY": Press ­ or + to set the hour, then press PLAY/STOP·ENTER, press ­ or + to set the minute, then press PLAY/ STOP·ENTER. B-ONLY: Only the alarm will sound. B-PLAY: The selected message will be played back after the alarm. "ALARM ON" will be displayed. 5 Press (stop) to exit the menu mode. The setting process is finished and "" (alarm indicator) appears in the display window. GB When the set date and time comes At the set time, the alarm will sound for about 10 seconds and the selected message will be played back. (If you have selected "B-ONLY, " only the alarm will sound. ) During playback, "ALARM" will flash in the display window. When the playback ends, the IC recorder will stop automatically at the beginning of that message. To change the alarm setting Start from step 2 on page 43. To cancel the alarm setting Follow steps 1 and 2- on page 44. In step 2-, press ­ or + to select "OFF, " and press PLAY/STOP·ENTER. The alarm will be cancelled, and the alarm indicator will disappear from the display window. To listen to the same message again Press PLAY/STOP·ENTER, and the same message will be played back from the beginning. Playback To stop the alarm before the playback starts Press (stop) while the alarm sound is heard. You can stop the alarm playback even when the HOLD function is activated. GB Notes When the clock has not been set or no messages are recorded, you cannot set the alarm. The alarm sounds even if you set "BEEP" to "OFF" in the menu (page 60). If you try to set the alarm to play back a message at a previously set time on another message, "PRE SET" will be displayed, preventing new settings. If the alarm time comes while another message is being played back with an alarm, the playback stops and the new message will be played back. If the alarm time comes during recording, alarm will sound for 10 seconds after the recording is finished and playback begins. [. . . ] Troubles as mentioned below are not malfunctions of the IC recorder. Symptom You cannot record messages up to the maximum recording time. Cause/Remedy If you record messages in a mixture of SHQ, HQ, SP or LP modes, the recordable time varies from the maximum SHQ mode recording time to the maximum LP mode recording time. The sum of the number on the counter (elapsed recording time) and the remaining recording time may be less than the IC recorder's maximum recording time. You cannot specify the finishing point B before the starting point A has been set. You cannot specify the finishing point B. Troubleshooting GB Additional Information On noise Precautions On power Operate the unit only on 3. 0 V or 2. 4 V DC. [. . . ]