User manual SONY ICD-MS1

[. . . ] The model number is located at the rear panel and the serial number is located inside the battery compartment. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. [. . . ] Make sure that the plugs are connected securely. ⷠWe recommend you make a trial recording to check the connections and volume control. ⷠWhen connecting equipment other than Sony's, refer to the instruction manual of the equipment. What you can do with the "Memory Stick Voice Editor" Software "Memory Stick Voice Editor" software allows you to transfer the messages to your display monitor, to save them on your computer's hard disk, and to play back and edit them. By removing the "Memory Stick" from the IC recorder and connecting it to your computer, you can display the list of messages contained in the "Memory Stick" on your computer's screen. Messages transferred to your computer can be played back on the computer. And you can edit (for example, labeling and changing the order of messages) these messages using the software on the computer. After editing them, you can transfer them back to the IC Recorder again. You can save the messages in the "Memory Stick" on your computer's hard disk. You can save them as the following file types. Transferring messages back to the "Memory Stick" for playing back with the IC recorder (page 52) The messages saved in your computer or sound files (MSV, ICS, or WAV files) received with an e-mail message can be added to the "Memory Stick" as MSV files, which can be played back on the IC recorder. you can add the messages one by one or all the messages in a folder at one time to the "Memory Stick". When you save all the messages in all the folders of your "Memory Stick" onto your computer and write them back to the "Memory Stick", you can restore the alarm, priority and other original settings on the IC recorder. File type The following file types only can be converted to the MSV file type and vice versa · About file size When a message is saved in a different file type, the file size of a message differs as follows: · Your computer and system software must meet the following minimum requirements. ⷠIBM PC/AT or compatible (You cannot use this software with Macintosh) -- CPU: 200MHz PentiumR processor or higher -- RAM: 32MB or more (64 MB or more recommended) -- Hard disk space: 70MB or more depending on the size and number of sound files you store. -- CD-ROM drive -- Sound board: Sound Blaster 16 compatible -- Display: High color (16 bit) or more and 800 x 480 dots or more · OS: Microsoft Windows 2000 Professional, Windows Millennium Edition, Windows 98, Windows 98 Second Edition or Windows 95 (You cannot use this software with Windows NT) After inserting, the installer starts up automatically and the following window appears. You need a computer with a "Memory Stick" slot or optional "Memory Stick" adaptors as shown below to use this software. Memory Stick Reader/Writer (MSAC-US1) Depending on the adaptors, more system requirements may be needed. After installing, the following modules are also installed depending the operation system of your computer. Microsoft DCOM95 for Windows95 These modules are not deleted after uninstalling the software. When the installation is finished, the following window appears. Turn on your computer and start up Windows. [. . . ] "PLEASE SET DATE & TIME" If you do not set date and time, you cannot set the alarm. Would you like to create new Message Folder?If you click [No], the [Select Drive] dialog box will be displayed. " The message data differs from those saved in the message list file . [. . . ]