User manual SONY ICD-MS525

[. . . ] The model number is located at the rear panel and the serial number is located inside the battery compartment. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] About added folder names The new folder is labeled automatically with double figures or letter like "FOLDER04" or "FOLDERAB". If there is a missing number or letter among the folder names, the new one is labeled using the missing number or letters automatically. You can change the folder name as you like (page 44). You can only delete a folder that has no recorded messages. You cannot delete a folder that has some recorded messages. First, erase all messages in the folder (see page 35) or move them (see the next page). Press ERASE for more than 1 second while pressing STOP. You cannot delete the last folder left in a "Memory Stick". ⷠAfter deleting a folder, the name of other folders are not changed. You can move the recorded messages to another folder. When you move a message to another folder, the one in the previous folder will be deleted. The first and last 5 seconds of the message will be played back 10 times, while "MOVE MSG. The folder with the message you want to move The destination folder ) to select the folder you want to move the message into, and then press the jog lever (x· Messages are sorted in order of the recorded date and time or the number of the priority marks in the folder. Usually the recorded messages are lined up in the order of recording. By adding priority marks (v) to important messages, you can renumber the messages in the order of their priority. there are four levels , "vvv" (the most important) , "vv" , "v" , and no priority mark. You can add priority marks both in the stop mode and in playback mode. Press A-B REPEAT/PRIORITY repeatedly to select the number of priority mark(s) (v) while "PRIORITY" is flashing. The setting is finished when the priority mark(s) (v) light(s) steadily in the display window and the messages are renumbered. Press A-B REPEAT/PRIORITY for more than 1 second during playback of the message you want to mark. "v" and "PRIORITY" will flash on the display window while the first and last 5 seconds of the message is played back 10 times. Messages are sorted in order of the number of priority mark(s) (v) in a folder. [. . . ] Because there are over 999 messages in the folders or the remaining memory of the Memory Stick is short, it is impossible to add an index. ⷠBecause the remaining memory of the "Memory Stick" is short, it is impossible to add a folder. Erase some folders or messages before adding. ⷠYou cannot use part of editorial features of this unit for an MSV (ADPCM) file message. [. . . ]