User manual SONY ICD-PX312M

[. . . ] 4-267-070-21(1) IC Recorder Operating Instructions Getting Started Basic Operations Other Recording Operations Other Playback Operations Editing Files About the Menu Function Utilizing Your Computer Additional Information Troubleshooting Index ICD-PX312M WARNING Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. RATED CURRENT CONSUMPTION: 800 mA • The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the copyright holders. • Sony is not responsible for incomplete recording/ downloading or damaged data due to problems of the IC recorder or computer. [. . . ] 中*: To record the sound of a normal conversation or meeting, such as recording in a meeting space or during interview (displayed as “ ” in the window). 低: To record dictation with a microphone in front of your mouth, a sound near the IC recorder, or a loud sound (displayed as “ ” in the window). Sets the LCF (Low Cut Filter) function to cut a low frequency to reduce the roaring noise from wind; therefore you can record a file more clearly. Selects the external input to be recorded that is connected to the m (microphone) jack. 麦克风*: Select when you record files using an external microphone. 音频输入 : Select when you record using other equipment. 开: Files in one folder are played back continuously. 关*: A file is played back and the IC recorder stops at the beginning of the next file. See page – LCF(Low Cut) – 选择输入模式 42, 44 连续播放 51 80 GB Menu items 详细菜 单 消除噪音等级 Settings (*: Initial setting) Sets the noise cut level to use when the IC recorder plays a file back which is recorded with the noise cut function. 强*: The noise cut level will be more intense. 弱: The noise cut level will be weakened. Select when you cannot catch the sound easily by setting “消除噪音等级” to “强. ” Turns the operation indicator on or off during operation. 开*: During accessing to the memory, recording or playback, the indicator lights or flashes. 关: The indicator does not light or flash, even during operation. See page 48 LED – P Note When the IC recorder is connected to a computer, the operation indicator lights or flashes even if “LED” is set to “关. ” 语言(Language) Sets the language to be used for messages, menus, folder names, file names, etc. (Chinese)*, English 16 About the Menu Function 81 GB Menu items 详细菜 单 时钟设定 Settings (*: Initial setting) Sets the clock to use the alarm function or record the date and time. 1Press and hold DISP/MENU to enter the menu mode. Select “详细菜单, ” then “时钟设定. ” 2Press –. or >+ to select “自动(同步)” or “手动, ” and then press N PLAY/STOP•ENTER. 自动(同步)*: When the IC recorder is connected to a computer that is running the Sound Organizer software, the clock will be automatically adjusted according to that computer. 手动: Sets the clock by setting year, month, day, hour, and minute in sequence. 3When you select “手动, ” press –. or >+ to set the year, month, day, hour, and minute in sequence, and then press N PLAY/STOP•ENTER. Select the last two digits of the year when you set the year. [. . . ] Using your computer, replace it with one which can be displayed artist name, or file name. When you set A-B • Depending on the files, the set positions may move. repeat playback, the set positions move a little. The remaining recording • You need a certain amount of free space for a file management area to time becomes shorter divide a file, therefore the remaining recording time will be shortened. [. . . ]