User manual SONY ICD-SX40

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. [. . . ] 4 Press the jog lever up or down (>/ . ) to select the minute digits, and press the jog lever (x·B). Continued 49GB Playing Back a Message at a Desired Time with an Alarm (continued) To play back at the same time every day 1 Press the jog lever up or down (>/ . ) to select "DAILY". 3 Press the jog lever up or down (>/ . ) to select the hour digits, and press the jog lever (x·B). 4 Press the jog lever up or down (>/ . ) to select the minute digits, and press the jog lever (x·B). 4 Select the alarm sound. 1 Press the jog lever up or down (>/ . ) to select "BEEP & PLAY" or "BEEP ONLY". 2 Press the jog lever (x·B). 5 Press the jog lever toward MENU to exit the menu mode. The display returns to the normal display. ", " is displayed when the message having an alarm setting is selected. When the set date and time comes At the set time, the alarm will sound for about 10 seconds and the selected message will be played back (If you have selected "BEEP ONLY" in step 4, only the alarm will sound). During alarm playback, "ALARM" will flash in the display window. When the playback ends, the unit will stop automatically at the beginning of that message. To listen to the same message again Press the jog lever (x·B). The same message will be played back from the beginning. 50GB To cancel the alarm setting before the playback starts Press xSTOP while the alarm sound is heard. You can stop even when the HOLD function is activated. Notes · If the alarm time comes while another message is being played back with an alarm, the playback stops and the new message will be played back. · If the alarm time comes during recording, the alarm will sound after the recording is finished. In the stop and recording mode: The remaining recording time indication. During playback During recording or stop Continued 53GB Selecting the Display Mode (continued) REC DATE (recorded date) The date the current message was recorded. (If the clock has not been set, "----Y--M--D" will be displayed. ) REC TIME (recorded date and time) The date and time the current message was recorded. (If the clock has not been set, "-M--D--:--" will be displayed. ) Only the starting time of the recorded message is displayed. The displayed time does not advance during the recording. CODEC (file format) The file format of the current message (LPEC or ADPCM) MSG. NAME (message name) The message name will be displayed in the display window. If the message has no name, the message name will not be displayed in the display window. 1 Longer message names A message name with more than 10 characters will be displayed with the scroll function. 4 5 Press the jog lever (x·B). Turn the jog lever toward MENU to exit the menu mode. 54GB On Sleep display mode If the unit is left unused for more than 3 seconds in the stop mode, the display will turn to sleep display mode as shown to the right, regardless of the display mode setting. To display the current time Press xSTOP button during the sleep display mode. The current time will be displayed for 3 seconds in the display window. Other Functions 55GB Formatting a "Memory Stick" You can format a "Memory Stick" using the Memory Stick IC Recorder. Formatting will delete all data recorded in the "Memory Stick" including images and other data. Before formatting, check the data in the "Memory Stick". Because a commercially available "Memory Stick" has already been formatted at the factory, you do not need to format a "Memory Stick" before the first use. [. . . ] 63 R Recorded date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Recording mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Remaining memory . . . . . . . . . . . . . . . . . . . . . . [. . . ]