User manual SONY ICD-UX70RED

[. . . ] 3-274-295-13(1) Getting Started IC Recorder Operating Instructions Owner's Record The model number is located at the rear panel and the serial number is located inside the battery compartment. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Serial No. Basic Operations Various Recording Modes Playback/Erasing Editing Messages Utilizing the Menu Function Utilizing Your Computer Troubleshooting Additional Information Index ICD-UX70/UX80 © 2007 Sony Corporation For the customers in the United States The following FCC statement applies only to the version of this model manufactured for sale in the USA. [. . . ] FOLDER*: Messages in one folder are played back continuously. ALL: All messages are played back continuously. Sets whether a beep will be heard or not. ON*: A beep will sound to indicate that an operation has been accepted. OFF: No beep sound will be heard. BEEP Note LED The alarm sounds even if you set "BEEP" to "OFF" in the menu. Turns the operation indicator on or off during operation. ON*: During recording or playback, the operation indicator lights or flashes. OFF: The operation indicator does not light or flash, even during operation. Note When the IC recorder is connected to a computer, the operation indicator lights or flashes even if "LED" is set to "OFF. " GB Menu items BACKLIGHT Settings (*: Initial setting) Turns the backlight in the display window on or off. ON*: The backlight in the display window lights up for 10 seconds. OFF: The backlight in the display window does not light, even during operation. The selected message will be moved to the selected folder (page 31). Before attempting to move a message, select the message to be moved and then go to the menu window. ON: To set the alarm, select "ON" and set the date, time or day of the week or choose daily for playback. All messages in the selected folder will be erased (page 30). Press /MENU to return to the folder window before erasing the messages and select a folder from which all messages are to be erased, and then go to the menu window and select "EXECUTE. " The selected message will be erased (page 30). Before erasing the message, select a message to be erased, and then go to the menu window and select "EXECUTE. " MOVE ALARM Utilizing the Menu Function ERASE ALL ERASE A FILE GB Menu items DETAIL MENU Settings (*: Initial setting) SELECT INPUT Selects the external input to be recorded that is connected to the (microphone) jack. MIC IN*: Select when you record messages using an external microphone. AUDIO IN: Select when you record using other equipment. DATE & TIME Sets the clock by setting year, month, day, hour, and minute in sequence (page 14). FORMAT Sets the formatting of the drive. EXECUTE: "FORMATTING . . . " appears and the drive will be formatted. CANCEL*: The drive will not be formatted. Notes Use the IC recorder formatting function to format the memory. When the memory is formatted, all the data stored in the IC recorder will be erased. [. . . ] Should any solid object or liquid fall into the unit, remove the battery and have the unit checked by qualified personnel before operating it any further. On safety On handling Additional Information GB On noise Noise may be heard when the unit is placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. Noise may be recorded when an object, such as your finger, etc. , rubs or scratches the unit during recording. To clean the exterior, use a soft cloth slightly moistened in water. Do not use alcohol, benzine or thinner. Specifications Capacity (User available capacity) ICD-UX70: 1 GB (approx. [. . . ]