User manual SONY ICD-UX81F

[. . . ] For customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. [. . . ] : Messages in one folder are played back repeatedly. ALL: All the messages are played back repeatedly. The selected message will be moved to the selected folder. Before attempting to move a message, select the message to be moved and then go to the menu window. ON: To set the alarm, select "ON" and set the date, time or day of the week or choose daily for playback. OFF*: The alarm is cancelled. See page 43 MOVE 54 ALARM 49 GB Menu items ERASE ALL Settings (*: Initial setting) All messages in the selected folder will be erased. Press /MENU to return to the folder window before erasing the messages and select a folder from which all messages are to be erased, and then go to the menu window and select "EXECUTE. " The selected message will be erased. Before erasing the message, select a message to be erased, and then go to the menu window and select "EXECUTE. " The IC recorder enters FM radio mode. Scans automatically for available frequencies. EXECUTE : The automatic presetting is activated. CANCEL* : The automatic presetting is cancelled. Sets the receiver sensitivity when listening to the FM radio. DX* : When the receiving signal is strong enough to receive, select this setting. LOCAL : When the receiving signal is weak to receive, select this setting. See page 53 ERASE A FILE 52 FM RADIO** AUTO PRESET** 85 90 Utilizing the Menu Function DX/LOCAL** 88 ** for ICD-UX71F/UX81F/UX91F only GB Menu items Settings (*: Initial setting) See page 91 SCAN SENSITIVITY** Sets the scanning sensitivity when presetting FM radio stations. HIGH (SCAN H)*: The scanning sensitivity is set to high. LOW (SCAN L) : The scanning sensitivity is set to low. AUDIO OUTPUT** During FM reception or FM recording, you can switch between the sound from the speaker and the sound from the headphones. HEADPHONES* : The sound comes out from the headphones. SPEAKER : The sound comes out from the speaker (s). When set to "ON, " the IC recorder enters the recording pause mode when no sound is detected for more than 2 seconds, and the IC recorder starts recording again as a new message when any sound is detected. ON: The synchronized recording function is activated. OFF*: The synchronized recording function is cancelled. 87 DETAIL MENU SYNC REC 35 SELECT INPUT Selects the external input to be recorded that is connected to the (microphone) jack. [. . . ] 1. 92 GB =2, 072, 313, 856 Byte) ICD-UX91F: 4 GB (approx. 3. 86 GB =4, 147, 806, 208 Byte) A part of the memory capacity is used as a management area. Bit rates and sampling frequencies for MP3 files*2 Bit rate: 32 - 320 kbps, VBR Sampling frequencies: 16/22. 05/24/32/44. 1/ 48 kHz *2 The playback of MP3 files recorded using the IC recorder is also supported. Not all encoders are supported. Bit rate and sampling frequencies*3 for WMA files Bit rate: 32 - 192 kbps*4, VBR Sampling frequencies: 44. 1 kHz *3 WMA Ver. 8 Class2A is compatible, however, MBR (Multi Bit Rate), Lossless, Professional, and Voice are not supported. [. . . ]