User manual SONY ICF-7600D

[. . . ] Otherwise, the settings for the clock, standby timer, preset stations and the channel step will be initialized and "0:00" will flash in the display. â· Do not carry the dry batteries together with coins or other metallic objects. It can generate heat if the positive and negative terminals of the batteries accidentally come into contact with metallic objects. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] The batteries are used to back up the computer inside the unit. It will give you many hours of reliable service and listening pleasure. Before operating the radio, please read these instructions thoroughly and retain them for future reference. These instructions cover these models: ICF-M770L, ICF-M770S and ICF-7600D. Should any problem persist after you have made the following checks, consult your nearest Sony dealer. The unit is being used in extremely high or low temperatures or in a place with excessive moisture. Very weak or interrupted sound, or unsatisfactory reception. In a vehicle or in a building, listen near a window. A station cannot be received when a PRESET TUNING button is pressed. The memory of the station has been initialized, or another station is preset. Quartz-controlled PLL (Phase Locked Loop) synthesizer system using a microcomputer for easy pinpoint tuning. If the radio is turned on, turn off the radio. The radio is turned on at the preset time and " lights up. After 60 minutes, the radio " will automatically turn off. Once you preset the standby timer, the radio will turn on at the preset time everyday. Turn TUNE/TIME SET to set the hour for the current time, then press mb/CLOCK (CLOCK for ICF-M770L). If you do not operate STANDBY TIME SET or TUNE/TIME SET within 65 seconds, the standby timer setting mode will be cancelled. â· If you do not turn off the radio, the standby timer will not activate. Turn TUNE/TIME SET to set the minute for the current time, then press mb/ CLOCK (CLOCK for ICF-M770L). The clock starts operating, and ":" starts flashing. To activate the standby timer again, press " lights up. To set the current time exactly to the second, adjust the minute and then press mb/CLOCK (CLOCK for ICF-M770L) to synchronize with a time signal (such as the telephone time signal). [. . . ] Change the settings as shown below to able to listen to the radio. Area North and South American countries Other countries Channel step 10 kHz 9 kHz For SW band, if the scanning starts from a frequency inside the range of a meter band, the scanning is performed only within the current meter band. If the scanning starts from a frequency outside the range of a meter band and reaches the following meter band, the scanning will continue within that meter band. Press OPERATION to turn off the radio before the set time has elapsed, then press OPERATION again to turn on the radio. [. . . ]