User manual SONY ICF-C233L

[. . . ] Turn the VOL (volume) control to make Sure the sound is audible. Each time you press RADIO ON/SLEEP, the duration changes as follows. 1 MHz and the AM channel step is set to l0 kHz for the model for the North America. [. . . ] Do not place the unit on a surface (a rug, a blanket, etc. ) or near materials (a curtain) which might block the ventilation holes. â· Should any liquid or solid object fall into the unit, unplug the unit and have it checked by a qualified personnel before operating it further. â· When the casing becomes soiled, clean it with a soft cloth dampened with a mild detergent solution. Never use abrasive cleaners or chemical solvents, as they may mar the casing. â· The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. If you have any question, please consult your nearest Sony dealer. Wish to store the station before the "P" indication stops flashing. Two beeps sound to indicate successful presetting. The current time indication replaces the band and frequency indication on the display 10 seconds after a station is preset, but the preset number remains in the display. â· When using the radio alarm, preset the station you wish to serve as the alarm (the wake-up frequency) under preset button 1. Time display United Kingdom and North America Other countries 12 hour 24 hour Press the preset number again after tuning manually to a different station. The band, frequency and preset number replace the current time indication in the display for about 10 seconds. Before setting the alarm, be sure to set the clock (See ' Setting the Clock"). [. . . ] For zero second adjustment, release CLOCK/ ENTER at the sound of a time tone. â· The colon (":") in the time indication is flashing when the radio is off and steadily displayed when it is on. The alarm will be silenced for about 8 minutes, after which it will sound again. [. . . ]