User manual SONY ICF-C773L

[. . . ] " will appear in the display when the duration " time is set. The radio will play for the time you set, then shut off. Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. The display shows the band and frequency for 10 seconds and then returns to the previous display. [. . . ] If you press ALARM A (ALARM B) again, the display show the selected sound number. After 4 seconds, the display will return to the current time To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. " " is displayed and the time indication changes to summer time. After 10 seconds, the display will return to the current time but the preset number will remain. tip Press TUNE/TIME SET + or ­ repeatedly until the desired mode is selected. Model for other countries/regions Band FM LW ICF-C773 ICF-C773L Channel step 0. Before setting the alarm mode, be sure to set the alarm time. Each press of ALARM MODE changes the indication on the display as follows: Press BRIGHTNESS to select high, middle or low for the display according to your preferences. The channel step of this unit is factory-set to 9 kHz or 10 kHz. Change the settings as shown below to be able to listen to the radio. Area North and South America Other countries/regions Channel step 10 kHz 9 kHz If the same alarm time is set for both ALARM A and B, the ALARM A takes priority. Two short beeps sound when the display returns to "PRESET 1". The radio or sound turns off but will automatically come on again after about 10 minutes. Each time you press SNOOZE/SLEEP OFF, the snooze time changes as follows: 20 30 40 50 60 10 The maximum length of the snooze time is 60 minutes. The display shows the snooze time for a few seconds and returns to show the current time. [. . . ] Each press changes the display as follows: Each press changes the band as follows: ICF-C773 /CLOCK for a few seconds until a beep sounds. Press TUNE/TIME SET + or ­ until the correct hour appears. Two short beeps sound, and the counting of the seconds starts. Two short beeps sound when the display returns to "10". [. . . ]