User manual SONY ICF-CD1000

[. . . ] ⷠWhen operating the unit with the batteries, remove the AC power adaptor in the following order: 1 disconnect from the wall outlet and 2 disconnect from the DC IN 6V jack of the unit. Do not stick paper or tape nor write anything on the surface. The selected alarm sounds at the time you set, and automatically turns off after 60 minutes. The alarm will sound at the same time the next day. [. . . ] The sleep timer is set and it will go off after the selected minutes. ⷠTo turn off the sleep timer before the selected time has elapsed, press SLEEP OFF/LIGHT. Push and slide up the battery cover The channel step of this unit is factory-set to 9 kHz/10 kHz to match the frequency allocation system of the country as listed. When needed, change the channel step before listening to the radio. Area North and South American countries Other countries Channel step 10 kHz 9 kHz You can preset up to five FM/AM stations (one station for each memory preset button 1 to 5). The "MEGA BASS" system produces a powerful bass with the use of a bass reflex system added to a normal speaker system. When you use the radio alarm, preset the station you want for the alarm in memory preset button 1, as the memory preset 1 station is the wake up station. When using house currents, the display will light up always. While holding down CLOCK/TRACK · While holding down CLOCK/TRACK ENTER, Keep pressing OFF ALARM RESET until a beep sounds. If you proceed to step 2 again, the channel step changes again. ⷠWhen the AM channel step is changed, the preset stations will be erased. When the batteries become weak, "i"will appear in the display and the CD and Radio functions will stop. When the batteries are exhausted, "i" will flash and only the clock is displayed. After replacing the batteries or when the AC power adaptor is connected, the i indicator will stop flashing and then start the unit operations. Operate the unit on the power sources specified in "Specifications. Do not leave the unit in a location near a heat source such as a radiator or airduct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. ⷠAllow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, a blanket, etc. ) or near materials (a curtain) which might block the ventilation holes. ⷠShould any liquid or solid object fall into the unit, unplug (or remove batteries from) the unit and have it checked by a qualified personnel before operating it further. ⷠWhen the casing becomes soiled, clean it with a soft cloth dampened with a mild detergent solution. Never use abrasive cleansers or chemical solvents, as they may mar the casing. [. . . ] The batteries are automatically disconnected then the display will continiously light up and then operate the unit. While holding down BAND WAKE UP TRACK, set the desired track by pressing TUNING TIME SET + or ­ . When you release BAND WAKE UP TRACK, the track is preset and the indication becomes the current time. Use the supplied AC power adaptor, which has an voltage-selector, be sure to adjust the voltageselector to the local power supply. [. . . ]