User manual SONY ICF-CD3IP

[. . . ] 4-115-539-32(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] MENU** /** ENTER** Setting the CD alarm For the CD alarm, the track you specified as the wake-up track is played first. (If the CD play mode is set to "SHUFFLE" or "SHUFFLE REP", all the tracks will be played in random order. ) To confirm an alarm setting Press ALARM/TIME SET + or ­. The setting will be displayed for 4 seconds. To change an alarm setting Connecting external equipment To listen to sound Various Modes of CD Playback You can play tracks repeatedly or in random order. Each press changes the play mode as follows: Display Indication None Play Mode (normal play) Tuning in to a station 1 Press RADIO BAND to turn on the radio and select the AM or FM band. 2 Press PRESET + or ­ to select the desired preset number. 3 Adjust the volume using VOLUME + or ­. Go back to the previous menu Select a menu item or a track for playback Execute the selected menu or begin playback 1 Perform steps 1 to 8 in "To set the 2 alarm". Press ALARM TIME SET A or B to select "CD" alarm mode. "VOL" and "TRCK" appear in the display. 3 Press ALARM TIME SET + or ­ to adjust 4 Press ALARM TIME SET A or B. 5 Press ALARM TIME SET + or ­ to select 6 The setting is entered. When "A" or "B" does not appear in the display, press ALARM TIME SET A or B again. Note If the CD alarm does not operate because a disc error occurred, there is no disc, or the CD compartment lid is open, the buzzer alarm will operate instead. Track number flashes. FM wire aerial AC power cord Improving the reception FM: AM: Extend the FM wire aerial fully to increase reception sensitivity. Connect the supplied AM loop aerial to the unit. Rotate the aerial horizontally for optimum reception. All the tracks are played once. "REP 1" Close the lid (single repeat) A single track is played repeatedly. "REP" (all repeat) All the tracks are played repeatedly. "SHUF" (shuffle play) All the tracks are played once in random order. "REP SHUF" (shuffle repeat) All the tracks are played repeatedly in random order. To cancel Automatic DST/Summer Time adjustment during the daylight saving time (summer time) period The CD, iPod & iPhone and VOLUME + buttons have a tactile dot. The Automatic DST/Summer Time adjustment can be cancelled. Press and hold CLOCK and BRIGHTNESS at the same time while the clock is displayed. "Auto OFF" appears in the display to show that Automatic DST/Summer Time adjustment has been cancelled. Notes The change timing of Automatic DST/Summer Time adjustment employed by the unit (see above) is subjected to variation by circumstances and the law in each country/ region. In such a case, cancel the Automatic DST/Summer Time adjustment and set the DST display manually as necessary. Customers living in a country/region that does not use the daylight saving time (summer time) must cancel Automatic DST/Summer Time adjustment before using the unit. [. . . ] You can operate the connected iPod by this unit or the iPod buttons. To Set the alarm 1 Press and hold ALARM TIME SET A or B for at least 2 seconds. "WAKE UP" appears and the hour flashes in display. 3 Press ALARM TIME SET + or ­ to adjust 4 Press ALARM TIME SET A or B. 5 Press ALARM TIME SET + or ­ to select the desired band. Band ("FM" or "AM") flashes. "VOL" and "PRESET" appears in the display. The display returns to clock mode four seconds after you have finished setting the duration setting and released SLEEP, and then the sleep timer starts. The unit will play for the duration you set, and then shut off. To turn off the unit before the preset time Press SNOOZE/DATE/SLEEP OFF or OFF/ALARM RESET. To change the sleep timer setting You can press SLEEP repeatedly to select the desired sleep timer setting even after the sleep timer has been activated. 2 Press ALARM TIME SET + or ­ repeatedly until the desired hour appears. To set the hour rapidly, hold down ALARM TIME SET + or ­. [. . . ]