User manual SONY ICF-CD814

[. . . ] The wake-up track number can be set up to 99. For the CD alarm, the track you specified as the Wake-up track is played first. If you press ALARM A or B again, the indication changes to the wake-up track number. [. . . ] , heart, square, star) cannot be played on this unit. If you press CD u when there is no disc in the CD compartment, "00" flashes for a few seconds on the display and the unit turns off automatically. You can fall asleep to the CD, RADIO, or AUDIO IN using the built-in sleep timer that turns off the CD, RADIO or AUDIO IN automatically after a preset duration. Every push changes the display as follows: OFF (current time) 90 30 60 The CD, RADIO, or AUDIO IN will play for the time you set, then turn off. ⷠTo turn off the CD, RADIO or AUDIO IN before the preset time, press SNOOZE/SLEEP OFF. Note Even if the Sleep Timer is set, it cannot turn off the power of optional components connected to the AUDIO IN jack of this player. Halogenated flame retardants are not used in printed wiring boards. There is a tactile dot beside volume to show the direction to turn up the volume. Do not operate the unit over a steel desk or metal surface, as this may lead to interference of reception. You can fall asleep to the CD, RADIO or AUDIO IN and be awakened by the CD, RADIO or buzzer alarm. Listening to the sound from the connected optional components 1 Connect the AUDIO IN jack of this player with the line output jack or headphones jack of the optional component (ex: portable music players) using the stereo audio connecting cable (not supplied). Operate the unit on the power sources specified in the "Specifications. To disconnect the AC power cord (mains lead), pull it out by the plug, not the cord. ⷠThe unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. ⷠDo not leave the unit in a location near a heat source such as a radiator or air duct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. ⷠTo reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, a blanket, etc. [. . . ] This unit is also equipped with a dual alarm function. You can set the alarm for two different times - ALARM A and ALARM B. Press TIME SET + or ­ until the correct hour appears in the display. [. . . ]