User manual SONY ICF-F11S

[. . . ] After 4 seconds, the display will return to the current time Radio" and manually tune into the station you wish to preset. Hold down the PRESET 1 to 5 button you wish to preset for more than 2 seconds. Example: Display window when you set FM 90 MHz in the PRESET 2 button for FM2. Before setting the alarm mode, be sure to set the alarm time. [. . . ] 2 oz): ICF-C763 (North and South America model) Design and specifications are subject to change without notice. The alarm will come on again at the same time the next day. Two short beeps sound when the display returns to "PRESET 1". Note Holding down the desired PRESET 1 to 5 button for more than a few seconds in step 3 will replace the previous station on the PRESET 1 to 5 button with the station you tuned into. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Press BRIGHTNESS to select high, middle or low for the display according to your preferences. You can change the setting of the night light on the edge of the lid. set NIGHT LIGHT MODE to STANDBY , ON or OFF. The night light operates as follows: STANDBY: The night light turns on when the radio is turned on, or when the lid is open. Two short beeps sound, and the AM (MW) channel step will be changed. If you proceed to step 2 again, the channel step changes again. You can enjoy falling asleep to the radio using the built-in sleep timer that turns off the radio automatically after a preset duration. You can set the sleep timer to durations of 90, 60, 30, or 15 minutes. Each press changes the display as follows: When the AM (MW) channel step is changed, the preset stations will be initialized. â· When the AM (MW) channel step is changed, the FM channel step is also changed. To Set the Radio Alarm (ALARM A) 1 Press ALARM A for a few seconds until a The display shows the band and frequency for 10 seconds and then changes back to the current time. 15 30 Two short beeps sound when the display returns to "90". " " will appear in the display when the duration time is set. The radio will play for the time you set, then shut off. To turn off the radio before the preset time Press SNOOZE/SLEEP OFF or SLEEP. [. . . ] If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Two short beeps sound, and the counting of the seconds starts. 05 MHz*, the AM (MW) channel step is set to 9 kHz, and the LW channel step is set to 3kHz (Other models). " Two short beeps sound when the minimum frequency of each band is received during tuning. [. . . ]