User manual SONY ICF-M60SRDS

[. . . ] When you turn TUNE/TIME SET to or , the time digits move forward or backward by one step, and when you or , the time digits turn it to move rapidly. If you do not operate mb/CLOCK (CLOCK for ICF-M60LRDS) or TUNE/TIME SET within 65 seconds, the clock setting mode will be cancelled. When the broadcast is over, the unit retunes to the previously tuned station. AC power cord (1) Design and specifications are subject to change without notice. [. . . ] "0:00" will flash in the display when the batteries are installed or the AC power cord is plugged in for the first time. The clock can be adjusted only when the radio is turned off. The radio is not turned on even if OPERATION is pressed, or the radio is suddenly turned off. Please keep a copy of your settings in case you want to preset them again. The hour for the current time, then press mb/CLOCK (CLOCK for ICF-M60LRDS). It will give you many hours of reliable service and listening pleasure. Before operating the radio, please read these instructions thoroughly and retain them for future reference. These instructions cover these models: ICF-M60LRDS and ICF-M60SRDS. Checks the station name you are listening to. The clock starts operating, and ":" starts flashing. To set the current time exactly to the second, adjust the minute and then press mb/CLOCK (CLOCK for ICFM60LRDS) to synchronize with a time signal (such as the telephone time signal). To search for other stations of the same programme type Press OPERATION to turn off the radio before the set time has elapsed, then press OPERATION again to turn on the radio. This function displays the name of the station that you are currently tuned in to. If the unit receives a station transmitting the RDS data that includes programme service data, " will light up and the station " name will appear. The searching starts and " " starts flashing. When the unit detects a station, it will tune in to that station. You can press SLEEP repeatedly to select the desired sleep timer setting even after the sleep timer has activated. This function searches for an alternative frequency with a stronger signal from the AF list in the same network such as "BBC", which have several different frequencies. To search for other stations of the different programme type When the station with a stronger signal is detected, the unit automatically tunes in to that station. If the RDS data being received does not contain AF list, "NO AF" will be displayed for 2 seconds. If the unit cannot receive a station after the searching of the whole AF list is completed, the unit retunes to the previously tuned station. If you preset a station transmitting RDS data that includes the AF list, the AF list being received will also be memorized. [. . . ] To turn off the CT function, press " is CLOCK AUTO ADJUST while " displayed. If the unit cannot receive the CT data within 2 minutes, "NO CT" will be displayed for 2 seconds. â· If you select a band other than FM, " " disappears temporarily. â· Turn off the CT function in areas where it may not operate. [. . . ]