User manual SONY ICF-S79V

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. [. . . ] ⷠWhen the casing becomes soiled, clean it with a soft cloth dampened with a mild detergent solution. Never use abrasive cleansers or chemical solvents, as they may mar the casing. DO NOT IMMERSE IN WATER This product is not designed to be immersed in water or to come in continuous contact with water. ⷠOpen the battery compartment lid with dry hands where water cannot fall into the unit. ⷠDo not use the unit in water. Do not expose the unit to water that is warmer than 70°C (158°F) for a long time. ⷠWhen the unit gets wet or if you accidentally drop the unit into the water, wipe it with a soft cloth. ⷠDo not touch the unit with hands wet with soapsuds. If you have any questions, please consult your nearest Sony dealer. The frequency will appear for a few seconds and then the display will return to the current time. ⷠTo change the preset station, preset a new station to the button of your choice. Splash resistant; you can listen to the radio while taking a shower. AUTO OFF function automatically turns off the radio after a preset duration. 5 memory presets buttons to preset your favorite stations for easy tuning. Install three R14 (size C) batteries (not supplied) with correct polarity and close the lid until it clicks. After a few seconds, the display will return to the current time but the preset tuning number indication will remain. [. . . ] Design and specifications are subject to change without notice. You can use the countdown timer with the PRESET TIMER buttons. While holding down CLOCK, press TIME ADJUST + or ­ until the correct time appears in the display. [. . . ]