User manual SONY ICF-2010

[. . . ] Outputs: 2 (Stereo headphone jack) (Europe and Australian model only) Power outputs: 1W + 1W (at 10% harmonic distortion) Power requirements: 120 V AC, 60 Hz (South America) 240 V AC, 50 Hz (Australia) 220 V - 230 V AC, 50 Hz (Other countries) For the power backup function: 9 V DC, one 6F22 battery Battery life: Approx. 32 hours, using Sony battery S-006P (U) Dimensions: Approx. Battery Optional accessory Cleaning Kit KK-WM1 Your dealer may not handle some of the above listed optional accessories. Please ask your dealer for detailed information on the optional accessories available in your country. [. . . ] Design and specifications subject to change without notice. Should any problem occur with the unit, make the following simple checks to determine whether or not servicing is required. if the problem persists , consult the nearest Sony dealer. The clock does not show the correct time. There has been an electrical power interruption. The tape, radio or buzzer alarm sound does not come on at the preset time. If it is turned down completely, the alarm sound will not be heard. ⷠThe inserted cassette tape cannot be played back. The tape cannot be played back when the tape alarm is set. We recommend the cleaning after every 10 hours of operation. ⷠIf you set ALARM A and ALARM B to the same desired time, only ALARM A will work. ⷠEven if you are listening to the radio, you can set the tape, radio or buzzer alarm. ⷠWhile you are listening to the tape, you can set only the buzzer alarm. While holding down CLOCK, press either + or ­ under TIME SET till the correct time appears in the display. 12 - hour system: "AM 12:00" = midnight 24 - hour system: "0:00" = midnight · To set the current time rapidly, keep pressing the + or - button holding down CLOCK. While holding down SNOOZE/DATE/ SLEEP OFF, press either + or ­ under TIME SET till the correct date appears in the display. The radio, tape or buzzer will shut off but will automatically come on again after about 6 minutes. You can repeat this process as many times as you like. ⷠYou can reset the alarm time while activating the snooze function. You can fall asleep to the radio sound and you will be awakened by the tape/radio/buzzer alarm at the preset time. [. . . ] You can fall asleep to the radio sound and you will be awakened by the tape/radio/buzzer alarm at the preset time. Press RADIO ON/SLEEP to turn on the radio and adjust volume by turning VOLUME. When an FM stereo program of sufficient signal strength is received, the FM STEREO indicator lights up. Enjoy falling asleep to the radio using the built-in sleep timer that shuts off the radio automatically at a preset time. [. . . ]