User manual SONY ICF-C710

[. . . ] ⷠThe unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. If you have any questions, please consult your nearest Sony dealer. The Dream Machine will give you many hours of reliable service and listening pleasure. Before operating the Dream Machine, please read these instructions thoroughly and retain them for future reference. [. . . ] These instructions cover these models: ICF-C113 and ICF-C710. SELECT/PRESET button (in this case, 2) until you hear two short beeps. While holding down RADIO OFF, keep pressing BAND until a beep sounds. If you proceed to step 2 again, the channel step changes again. The radio or buzzer will shut off but will automatically come on again after about 8 minutes. You can repeat this process as many times as you like. When the AM channel step is changed, the preset stations will be erased. The frequency will appear for a few seconds and then the display will return to the current time. ⷠWhen using the radio alarm, preset the station you wish to serve as the alarm under preset button 1. The band and frequency will appear in the display for a few seconds and then the current time indication returns to the display. The band and frequency are displayed for a few seconds, after which the current time indication returns to the display. ⷠIf the radio alarm A RADIO comes on while the radio is playing, the station switches to the frequency set under preset number 1. Hold down A RADIO or B BUZZER until a short beep sounds. You can fall asleep to the radio sound and you will be awakened by the radio or buzzer alarm at the preset time. 6 oz) Design and specifications are subject to change without notice. Press either TUNE/TIME SET + or ­ until the desired hour appears in the display. Set BRIGHTNESS to H (high) or L (low) to make the display more visible. To display the year and date, press SNOOZE/ DATE/SLEEP OFF once for the date and within 2 seconds press it again for the year. The date or year will appear in the display for a few seconds and then the display returns to the current time. When SNOOZE/DATE/SLEEP OFF is pressed while the SNOOZE function is operating, the year and date will not appear in the display. [. . . ] When SNOOZE/DATE/SLEEP OFF is pressed while the SNOOZE function is operating, the year and date will not appear in the display. To set the current time from zero seconds, release CLOCK with the time signal at step 5. Press either TUNE/TIME SET + or ­ until the desired minute appears in the display. Two short beeps sound to indicate successful presetting. [. . . ]