User manual SONY ICF-TR40

[. . . ] switch the channel step when needed (see "Changing AM(MW) Channel Step"). Area North and South American countries Other countries Channel step 10 kHz 9 kHz Two beeps sound to confirm the setting. You can play tracks repeatedly or in random order. Enjoy falling asleep to the radio with the sleep timer. [. . . ] The channel step of this unit is factory-set to 9 kHz or 10 kHz. Area North and South American countries Other countries Channel step 10 kHz 9 kHz A strong shock may cause playback to stop even with the ESP function on. â· The sound may skip or become noisy when: -- listening to a dirty or scratched CD, -- listening to an audio test CD or, -- the player receives continuous shock. â· The sound will drop for a while when ESP is switched on or off during play. â· ESP cannot be switched on or off when the main cover is closed. Two short beeps sound to confirm the setting. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Each press of ALARM MODE changes the mode in the following order: This will allow you to hear outside sounds and to be considerate to people around you. Discard used batteries according to manufacturer's instructions. ALARM RESET and BAND for about 5 seconds until you hear two beeps. When "E" is lit in the display, the unit stops all operation. Open the main cover to listen through the speakers. When a headphone set is connected to the i (headphones) jack, there will be no sound from the speakers. The alarm turns off, but will be activated automatically after about 8 minutes. The battery compartment lid is designed to become detached if opened with excessive force. When the unit is not being used for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. When the button is pressed, the display shows the total number of tracks and the running time of the CD. When a track is playing, the display shows the track number and the elapsed time of the track. Avoid operating the unit on a steel desk or metal surface. For the CD alarm, you can choose a track on the CD to wake up to (the Wake-up track). Connect the AC power adaptor to the DC IN 6V jack, and plug it into a wall outlet. [. . . ] â· When the AC power adaptor is not to be used for a long period of time, be sure to unplug it both from the DC IN 6V jack and from the wall outlet. â· Do not remove the lithium battery even when operating the unit on house current, as it serves as backup power for the memory. â· If power from the AC power adaptor is disrupted due to power interruption, etc. , the unit switches to battery power when available. [. . . ]