User manual SONY ICS-SP30

[. . . ] 401 International Parkway Suite 100 Richardson, Texas 75081 www. Enseo. com Copyright 2007 ­ Enseo, Inc. 1 Introduction The ICS-SP30 is a professional tri-band tuner providing 8VSB, QAM and NTSC tuner function for internal connection to a line of Sony Professional LCD and Plasma displays. The ICS-SP30 includes support for Pro:IdiomTM decoding on lodging systems supporting this encryption technology. This document outlines the installation, set up and operation of the ICS-SP30. [. . . ] This feature is used when guests may have situations where extra IR presses are causing undesirable interaction. OFF ON This setting allows for a selectable period of time where the ICS-SP30 will ignore additional IR button presses during a power on process. Copyright 2007 ­ Enseo, Inc. Minimum Volume Set the available minimum volume from 0 to 99 Maximum Volume Sets the available maximum volume from 0 to 99 Setup Key Sequence Provides a method for changing the key button sequence used to access set up features. If these are changed, make sure to write down the keys. Failing to record these would require re-cloning an entire system to restore the set up key sequence. A key press sequence of up to eight buttons can be defined. These keys are more than numeric keys and adds to the security for a system. Image 13 ­ Setup Key Sequence Submenu Orbit Options This submenu provides options available on Sony Plasma monitors to allow selection of orbit by channel. Orbit is a feature in the Sony Plasma monitors to reduce the potential for image retention from certain static images. Sub-menu Options Include Size ­ This is the size of the orbit (how large of an area to shift the display image). Options include: Small, Medium and Large Copyright 2007 ­ Enseo, Inc. 15 Cycle Time ­ This is the duration of time to complete a full shift of the image through orbit (includes shifts UP, RIGHT, DOWN, AND LEFT to complete an orbit). The selection options for Cycle Time are: 10-seconds, 30-seconds, 60seconds, and 5 minutes. Note: The shorter the selected cycle time, the more noticeable the orbit function will be to the user/viewer. Select Channels ­ This selection area allows selection/de-selection of specific channels to implement orbit on. Channels must be setup and made available in the channel ring prior to identifying them for use with the orbit function. Text labels in this section are available if the label information is entered in the edit channel (Page 8). Image 15 ­ Select Channels PPV Terminal Options This submenu provides options for specific hospitality configuration requirements, including: Terminal Controls Volume Default is YES for the lodging terminal device to control the volume. In some specific installations, this may need to be set to NO for the ICS-SP30 to control the volume adjustment independent of the lodging system. Terminal Controls Sleep Default is YES for the lodging terminal device to control the command settings for the Sleep Mode. In some specific installations, this may need to be set to NO for the ICSSP30 to directly manage the Sleep Mode independent of the lodging system. Terminal Controls CC Default is YES for the lodging terminal device to control the settings for Closed Captioning. In some specific installations, this may need to be set to NO for the ICSSP30 to control directly manage the Closed Captioning functions independent of the lodging system. Auxiliary Control Options This submenu provides setting for Baud Rate of communications over the service port. Baud rate of the serial communications port can be adjusted with fixed values from 1200 to 115200. Copyright 2007 ­ Enseo, Inc. [. . . ] If this feature is not enabled on the Setup menu, this item will not be visible on the User Menu. Note: The available inputs will be based on the model of display and video expansion boards installed (if any). Picture Format If made user-accessible from the Setup Menu, the user will have the ability to adjust the aspect ratio of content presented on the display. If this feature is not enabled on the Setup menu, this item will not be visible on the User Menu. Note: On Plasma monitors, user access to Picture Format will be limited to prevent the potential for image retention. Image 25 ­ Picture Format V-Chip Options If made user-accessible from the Setup Menu, the user will have the ability to set and control VChip settings to restrict content from being shown on the tuner. If this feature is not enabled on the Setup menu, this item will not be visible on the User Menu. Copyright 2007 ­ Enseo, Inc. 24 OPERATION The HD tuner is an advanced HDTV and NTSC TV tuner with features that support lodging systems and stand-alone operation. [. . . ]