User manual SONY IFT-R20

[. . . ] Cords no longer being in the way, making any AV unit setup possible. â· The camcorder can be a maximum of 26 feet (8 m)** distance from its source. â· The sound and picture quality is not inferior to using a cord type unit. [. . . ] When connecting the receiver to a power source use only the supplied AC power adaptor because the polarity of the supplied adaptor is opposite that of conventional adaptors. Do not use the supplied AC power adaptor for other electric appliances with a DC IN 6V jack. If the picture on the TV is distortion, press N then adjust the position of the camcorder. When not using turn the receiver POWER OFF. Do not block the space between the receivers IR sensor and the camcorder's transmitter. If you do the picture and sound will not function. â· The infrared rays will not penetrate walls or opaque glass, the infrared receiver must be used within the "in sight" area of the camcorder. â· Do not position the camcorder and receiver too close. Do not use this unit in combination with cordless headphones or another unit of the same type. This is not a malfunction and does not affect the infrared coverage distance. â· Be sure that no strong light sources such as direct sunlight, inverter light, or powerful remote signals block the path of the IR sensor on the receiver. If it does the picture and sound will not function, or distortion may result. â· Do not use in areas of strong electrical currents or radio waves. If you do clear playback is not possible. [. . . ] â· The camcorder's transmitter and the receiver are not facing each other. The receiver is positioned too far from the camcorder's transmitter. Background noise and unclear picture â· The camcorder's transmitter and receiver are not facing each other. [. . . ]