User manual SONY IPELA SNC-RZ50P

[. . . ] 3-990-921-11 (1) Network Camera User's Guide Software Version 1. 0 SNC-RZ50N/RZ50P © 2005 Sony Corporation Owner's Record The model and serial numbers are located on the bottom. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ____________________ For customers in the U. S. A. [. . . ] Interval Type the interval at which you want to send images to the FTP server periodically. You can set the hour (H), minutes (M) and seconds (S) between 1 second and 24 hours (one day). Note Recording Images in Memory -- Image memory Menu When you click Image memory in the Administrator menu, the Image memory menu appears. By using the image memory function, you can record the image and audio file, which has been shot being linked with the external sensor input or with the built-in object detection function, to a CF memory card (not supplied) or ATA memory card (not supplied) inserted into the camera. The image file can also be recorded periodically. The recorded image and audio files can be found or downloaded to the computer using the FTP server function. (See "Downloading Images from the Camera -- FTP server Menu" on page 59. ) The Image memory menu consists of three tabs: Common, Alarm recording and Periodical recording. For the verified cards, contact your authorized Sony dealer. Notes Administrating the Camera The actual interval may be longer than the set value, depending on the image size, image quality setting, bit rate and the network environments. Effective period Set the period during which the periodical sending is effective. Always: The periodical sending is always effective. Schedule: You can specify the period during which the periodical sending is effective. Click Schedule and the menu for the effective period is displayed. ("Setting the Schedule -- Schedule Menu" on page 63) · The frame rate and operability on the main viewer may be reduced during image storage. · Set Image memory to Off when you remove the CF memory card or ATA memory card from the camera or turn off the power of the camera with the CF memory card or ATA memory card inserted. · When you remove or insert a card, wait at least 10 seconds. · Before using a CF memory card or ATA memory card, format it using the computer, or using Format CF memoroy card or Format ATA memory card in the Initialize tab of the System menu (page 34). Common Tab -- Setting the image memory function OK/Cancel See "Buttons common to every menu" on page 30. Image memory To use the image memory function, select On. Recording Images in Memory -- Image memory Menu 55 Selected root directory Select a memory in which you want to save an image. The current memory space is displayed on the right. CF memory card: CF memory card inserted into the CF card slot of the camera. ATA memory card: ATA memory card inserted into the PC card slot of the camera. Note Note When you set Authentication to On, be sure to select either or both SMTP or/and POP before SMTP. POP server name This is necessary when POP before SMTP is selected for Authentication. Type a POP (receiving mail) server name using up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server that sends emails performs authentication using the POP user account. User name, Password Type the user name and the password of the user who owns the e-mail account. [. . . ] 60 volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 36 T TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 72 TCP/UDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 27 TCP/UDP Transmission. . . . . . . . . . . . . . . . . [. . . ]