User manual SONY IPT-DS1C

[. . . ] Record the serial number in the space provided below. Refer to this number whenever you call your Sony dealer regarding this product. __________________________ television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference using one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. [. . . ] Press the TV POWER button on the remote control to turn the TV set on. Use the TV/VIDEO button on the remote control to select the input to which the Network Media Receiver is connected. Press the Network Media Receiver POWER button on the remote control to turn the Network Media Receiver on. The standby indicator changes to green, and the ???screen, see page 00. z Hint If the ???"Start computer automatically" ???setting (page 45) is selected, and the computer is in standby or hibernation mode, it will automatically start up when the Network Media Receiver is turned on. Note For about 20 seconds after the power cord was connected, the Network Media Receiver cannot be turned on. Verify that the standby indicator is lit in red before pressing the Network Media Receiver POWER button. 40 To turn power off 1 Press the Network Media Receiver POWER button to turn the Network Media Receiver off. The standby indicator changes from green to red, and the screen display is turned off. Note The Network Media Receiver consumes a certain amount of power also while it is in the standby mode. To fully cut the power, disconnect the power cord from the AC outlet. 2 3 Press the TV POWER button to turn the TV set off. Turn power to the computer off. 1 2 On the computer, access the "Start" menu and click "Turn off computer". Click "Turn off". Operation Selecting a server Among the servers on the network, select the one that has the content you want to play. ???screen, select the server to remove by using the V/v buttons. Press the OPTIONS button on the remote control. The Options menu appears. Use the V/v buttons to select ???"Remove selected server" ???, and press the SELECT button. A verification message appears. 4 Use the B/b buttons to select "OK", and press the SELECT button. The selected server is removed from the ???screen. Operation Selecting content When you select a server, a list of all content items (video, music, photos) that can be accessed via the Network Media Receiver is shown (???Icon Meaning Folder /// /// /// Video folder Music folder Photo folder Normal video /// Video being recorded Video scheduled for recording Failed video recording /// Music Photo z Hint Playlists stored on the server are shown as folders on the ???screen, you can use the buttons on the remote control to select the desired content. 1 2 Use the V/v buttons to select a folder, and press the SELECT button. Use the V/v buttons to select the content you want to view or hear, and press the SELECT button. Depending on the type of content that was selected, the respective playback screen will appear. For information on the functions you can perform at the playback screen, see the pages listed below. Watching video c page 00 Listening to music c page 00 Displaying photos c page 00 z Hints · If the content items do not fit on one screen, use the PAGE up/down buttons on the remote control to move through the list. · When you select a folder, the content items in that folder will be displayed. · When you have opened a folder, you can go back to the previous (higher) folder by pressing the RETURN button on the remote control. [. . . ] (page 21) · Was the IP address allocation method for the Network Media Receiver selected correctly, according to the network environment?(page 37) c Have the initial settings at the computer been made correctly?(page 30) c The computer may have become instable. Restart the computer and start the server function. [. . . ]