User manual SONY IPT-DS2

[. . . ] Before operating the product, please read this manual thoroughly and retain it for future reference. To reduce fire or shock hazard, do not expose the unit to rain or moisture. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] 2 Press the release button (dark gray) of this unit to open the camera clips. Attachment A models according to the table of compatible models Position the camera with its lens facing the SONY logo on this unit. Attachment B models according to the table of compatible models Position the camera with its LCD screen facing the SONY logo on this unit. 4 Align the multi connector at the bottom of the camera with the multi connector on this unit. 5 Slide the camera slowly until it is positioned almost at the center of this unit. 6 Press the lock button (light gray) of this unit to close the camera clips. ¦ Notes Do not slide the camera with the camera clips closed. Make sure that the camera clips do not touch the lens or operating buttons of the camera. Press the release button of this unit to open the camera clips. Lift up the camera with one hand while supporting the tilt arm with the other. Press the lock button of this unit to close the camera clips. If you carry this unit somewhere, or if you do not intend to use it for a long time, reattach the protective cover. Attach the protective cover to this unit from the side of the lock button (light gray). Starting automatic shooting To finish automatic shooting press the MENU (stop) button of this unit to stop automatic shooting. ¦ Notes Turning this unit off during automatic shooting forcibly turns off the power to this unit. If you lift this unit up during automatic shooting, the unit may determine it to be an abnormal condition and its motor may stop and automatic shooting may temporarily stop. In this case, automatic shooting is resumed when you put this unit back in place. The operation/battery indicator rapidly flashes red if you forcibly stop the rotation or if an external force is applied to this unit during automatic shooting. In this case, remove the force and then turn this unit off and back on. When using this unit in public, be considerate of other people around you. You cannot change the camera to play mode during automatic shooting. Depending on the shooting environment, sometimes the camera may not detect faces or may detect things other than faces. [. . . ] An average number of pictures will be taken. A small number of pictures will be taken. (Auto) Automatically flashes according to shooting conditions. Intelligent Sweep Panorama shot setting (Only camera models that support Intelligent Sweep Panorama shooting) Panorama image size setting (Only camera models that support Intelligent Sweep Panorama shooting) 1 Insert the legs of the dedicated stand firmly into the mount. [. . . ]