User manual SONY KD-32NX100U

[. . . ] A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] Press the V or v button to select your choice of wall paper then press the OK button to store. Press the BLUE button repeatedly until all menus are removed from the screen. This feature allows you to set an age limit for viewing programmes. If any films or programmes classed above the age limit you have set are broadcast, you will be requested to enter a PIN code before viewing is allowed. If you have not already set a PIN code: Use the numbered buttons on the remote control to enter a 4-digit number of your choice. As you enter each digit it will be represented by a * in the PIN entry box. Note:This will be your PIN number for the future - please use a number you can remember easily. If you have already set a PIN code: Using the numbered buttons on the remote control, enter your 4-digit PIN code. As you enter each digit it will be represented by a * in the PIN entry box. With the `Age' box highlighted, press the V or v button to set the age limit you desire then press the OK button to confirm your setting. Press the BLUE button repeatedly until all menus are removed from the screen. This feature allows you to automatically re-tune all available Digital channels. This feature allows you to select a programme number from the displayed list and change the digital services of that programme. Press the V or v button to highlight the chosen programme number for your new channel. If you do not wish to select any of the programme numbers listed, press the RED or GREEN button to display the previous or next 5 programme numbers on the list. With your programme number highlighted, press the OK button to display the `Manual Programme Search' screen. Press the V or v button if you wish to change the channel number, then press the b button to make the select search box active. The words `Searching up' or `Searching down' appear in the select search box indicating that the TV is searching. If no Digital services are found on the channel you have chosen, the channel number changes up or down automatically and the search continues. When all services allocated to the selected channel have been found, the service selection screen is displayed. Press the V or v button to find and highlight the service you wish to allocate to the programme number selected in Step 4, then press the OK button to store. Repeat Steps 4 to 8 if you wish to manually add more channels to your TV. [. . . ] Contact a local installer to find out which transmitter you should be pointing your aerial at. Change your aerial to cover the channels used by digital programmes. (Contact a local installer) Ensure aerial is correctly aligned to transmitter. Ensure aerial is plugged directly into the TV (not through other equipment). [. . . ]