User manual SONY KDF-46E3000

[. . . ] 3-210-793-11(1) LCD Projection TV Operating Instructions KDF-46E3000 KDF-50E3000 © 2007 Sony Corporation Owner's Record The model and serial numbers are provided under the Product Support in the TV menu or at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV. Model Name Serial No. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s Reorient or relocate the receiving antenna. [. . . ] or, V/v to select the highlighted item. Press RETURN or HOME to exit. 31 TV Settings Descriptions Product Support Contact Sony Sony contact information is available from this screen for your convenience. Your TV's specific information such as Model Name, Serial Number, Software Version and downloadable ratings if available from the TV are displayed here. Press to display the diagnostics information for the current signal. Signal Diagnostics Clock/Timers Settings Current Time Sets the current time (day, hour, minutes, and AM/PM). The Timer feature will not be available until you set the Current Time. 1 Use the V/v/B/b button to highlight the Clock/Timers icon and press . 2 Use the V/v/B/b button to set the current time. 3 Press RETURN to display the confirmation screen. 4 Select Yes or No to save changes you made. Selecting Yes will save your settings and exit the Current Time setting screen. After the Current Time is set, you can set the Timer to automatically turn the TV on and off and tune to a specific channel at a scheduled time. 1 Use the V/v/B/b button to highlight the Timer icon and press . 3 Use the V/v/B/b button to set the following: Day of the Week, Time, Duration, Channel, and Volume. 4 Press RETURN to display the confirmation screen. 5 Select Yes or No to save changes you made. Selecting Yes will save your settings and will light up the TIMER LED. Sets the time in minutes (Off, 15min, 30min, 45min, 60min, 90min, or 120min) that you want the TV to remain on before shutting off automatically. This can also be set using the SLEEP button on the remote control (see page 20). Timer Sleep Timer Picture Settings Picture Mode Vivid Standard Cinema For enhanced picture contrast and sharpness. Most suitable for viewing in a theater-like environment. ~ · Picture Mode can also be accessed by pressing PICTURE on the remote control to directly toggle the modes. Reset Resets the current Picture Mode setting to the default values. 32 Advanced Iris By selecting the iris option, you can obtain the best brightness and contrast suited for your TV viewing. Auto 1, 2 Automatically detects the brightness of the screen. These options are best suited for programs such as movies that often change between bright scenes and low light setting scenes. Auto 1:Recommended option for viewing programs that have larger variation in brightness from scene to scene. [. . . ] · It is time for you to replace the projection lamp used in your TV. · Turn to page 43 on "How to Replace the Lamp" and follow the directions on replacing the lamp. · Use only the lamp designated for your TV model. · After the lamp is replaced, select the Lamp Replacement option in the General settings. [. . . ]