User manual SONY KDF-50E2010

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. [. . . ] "Custom": Allows you to store your preferred settings. "Cool": Gives the white colours a blue tint. "Warm" can only be selected when you set "Picture Mode" to "Custom". Resets all picture settings except "Picture Mode" to the factory settings. Reduces the picture noise (snowy picture) in a weak broadcast signal. You can select the options listed below on the Sound menu. "Standard": Enhances clarity, detail, and sound presence by using "BBE High definition "Dynamic": Intensifies clarity and sound presence for better intelligibility and musical realism by using the "BBE High definition Sound System. The clarity of the sound is improved by BBE while the width depth and height of sound image are expanded by BBE's proprietary 3D sound process. BBE ViVA Sound is compatible with all TV programs including news, music, dramas, movies, sports and electronic games. You can change sound effect by pressing 9 repeatedly. If you set "Auto Volume" to "On", "Dolby Virtual" changes to "Standard". Resets all the sound settings to the factory settings. "A"/"B"/"Mono": For a bilingual broadcast, select "A" for sound channel 1, "B" for sound channel 2, or "Mono" for a mono channel, if available. tip If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B". Keeps a constant volume level even when volume level gaps occur (e. "On": the sound is output from the TV speakers. "One Time Off": the TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment. "Permanent Off": the TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment. tips · To turn on the TV speakers again, change to on. You can select the options listed below on the Features menu. "Auto Format": Automatically changes the screen format according to the broadcast signal. "Vertical Size": Adjusts the vertical size of the picture when the screen format is set to Smart. [. . . ] Design and specifications are subject to change without notice. This TV does not support Sync on Green or Composite Sync. If a signal other than in the above chart is input, it may not be displayed properly or may not be displayed as you set. 1 Measure how long the 1 (standby) indicator flashes and stops flashing. [. . . ]