User manual SONY KDF-55 WF655 QUICK START GUIDE

[. . . ] Before replacing the lamp, turn the power off on the main unit. Wait several minutes, then unplug the power cord. [. . . ] 1-877-899-SONY (7669) for Canadian residents. Sony Corporation © 2004 Printed in U. S. A. L AUDIO L AUDIO R PCM/DOLBY DIGITAL DIGITAL AUDIO (OPTICAL) OUT TV R IN OUT CONTROL S remote control at the equipment and press DVD/ VCR and/or SAT/CABLE (POWER) that corresponds with that equipment. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer. 5 6 7 8 1 Replace the new lamp and tighten the screws. Reattach the lamp cover and tighten the screw. Tightly screw the side panel in its place. Inserting the CableCARD incorrectly may result in permanent damage to the card and the TV. 1 Checking the Supplied Accessories 1 2 3 Running Initial Setup If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. If you enter a new code number, the code number you previously entered at that setting is erased. In some cases, you may not be able to operate your equipment with the supplied remote control. In such cases, use the equipment's own remote control unit. Sony XL-2200 for KDF-WF655 series/KDF-XS955 series Loosen the screws on the rear side panel. (only for WF655) Manufacturer's codes Press POWER to turn on the TV. Press V/v to select the on-screen display language. The message "Start auto program now?" appears. [. . . ] You may need to purchase extra accessories, such as cables and splitters, depending on the components you plan to connect. · Turn off and unplug all components before making connections. [. . . ]