User manual SONY BRAVIA KDL-26L5000

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. [. . . ] For an auto-tuned VCR/ DVD recorder In analogue mode, press PROG +/-, or the number buttons, to select the video channel. For other connected equipment Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing *~ · Be sure to use only an authorized HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable. · When "Control for HDMI" compatible equipment is connected, communication with the connected equipment is supported. Refer to page 18 to set up this communication. Symbol on the screen Description COMP PC To see the equipment connected to 7. To see the equipment connected to 8. z It is recommended to use a PC cable with ferrites, such as the "Connector, D-sub 15" (ref. 1793-504-11, available in Sony Service Centre) or equivalent. Using Optional Equipment To connect Do this Headphones 9 Connect to the i socket to listen to sound from the TV on headphones. Conditional Access Module For details, refer to the instruction manual supplied with your CAM. (CAM) 0 To use the CAM, remove the rubber cover from the CAM slot. Connect a PC (page 16), and make sure that images from a PC appear on the screen. ~ You cannot display resolutions higher than WXGA (1280 × 768 pixels). "Control for HDMI" functions · Turns the connected equipment off interlocked with the TV. · Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play. · If you turn on a connected audio system while the TV is on, the input switches to the audio from the audio system. · Adjusts the volume and mutes the sound of a connected audio system. 1 2 Press TOOLS to display the Tools menu. The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner. You can use F/f/G/g to move the TV programme screen position. Press F/f to select "PIP", then press . 3 Press number buttons or PROG +/- to select the TV channel. To return to single picture mode Press RETURN. z You can switch the audible picture by selecting "PC Sound/TV Sound" from the Tools menu. 18 GB Using MENU Functions 5 External Inputs Selects equipment connected to your TV. · To watch the desired external input, select the input source, then press . Navigating through menus "MENU" allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. 6 Settings Displays the Settings menu where most of the advanced settings and adjustments are performed. 1 Press F/f to select a menu icon, then press . 2 Press F/f/G/g to select an option or adjust a setting, then press . For details about settings, see page 20 to 27. ~ The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed. * This function may not be available in some countries/regions. 2 Using MENU Functions 1 1 2 Press MENU. [. . . ] · If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information from equipment connected to the scart connector / to display the connected equipment list, · Press then select the desired input. · Check the connection between the optional equipment and the TV. Double images or ghosting (only in analogue mode) · Check the aerial/cable connection. [. . . ]