User manual SONY KDL-26S3000

[. . . ] For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive a DVB-T signal where you live. ⷠAlthough this TV set follows DVB-T specifications, compatibility with future DVB-T digital terrestrial broadcasts cannot be guaranteed. [. . . ] Selects whether to apply settings made in the Picture menu to all inputs, or only to the input currently being watched. Selects the picture mode except for PC input source. "Custom": Allows you to store your preferred settings. Resets all picture settings except "Target Inputs", "Picture Mode" and "Display Mode" to the factory settings. "Backlight" is not available when you set "Power Saving" to "High" (page 26). "Cool": Gives the white colours a blue tint. "Warm2" gives a redder tint than "Warm1". tip "Warm1" and "Warm2" can only be selected when you set "Picture Mode" to "Custom". Reduces the picture noise (snowy picture) in a weak broadcast signal. When you set "Picture Mode" to "Custom", you can set/change these settings. This setting is especially effective for dark images scenes. "Full Pixel": Displays the picture for 1080i or 1080p sources in the original size when parts of the picture are cut off. "Normal": Displays the picture in the original size. "­1"/"­2": Enlarges the picture to hide the edge of the picture. Adjusts the vertical size of the picture when the screen format is set to "Smart", "Zoom" or "14:9". You can select the options listed below on the Set-up menu. Starts the "first time operation menu" to select the language and country/region, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 6, 7). However, this option allows you to repeat the process (e. , to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Selects the language in which the menus are displayed. You can skip an input source that is not necessary. [. . . ] If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 4 socket through a DVI - HDMI adaptor interface (not supplied), and connect the equipment's audio out sockets to the audio in HDMI IN 4 sockets. The HDMI sockets only support the following video inputs: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Be sure to use only an HDMI cable that bears the HDMI logo. DVD player with component output F Video game equipment, DVD player or decoder G When you connect the decoder, the scrambled signal from the TV tuner is output to the decoder, then the unscrambled signal is output from the decoder. [. . . ]