User manual SONY BRAVIA KDL-32BX310

[. . . ] POWER CORD POLARIZATION: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. REGULATORY INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. [. . . ] Set to 1 to enable Ghost Channel display. Volume level at TV turn-on (Set 255 to retain last volume level). Set to 1 to disable Menu, Select, and Adj keys on front panel. Set to 1: enables TV to respond to IR codes to change Channel Bank directly. Set to 1 to put TV on/off below start channel number. Set to 1 to enable Alarm. 206-3852 PAGE 29 Installer Menus Installer Menu Items 26-I through 63-I Menu Item 26-I. OVER RIDE OLD OCV ACK MASK POLL RATE TIMING PULSE NOT USED CAMPORT EN. NOT USED NOT USED AUTO CAMPORT NOT USED NOT USED AUTO REAR Y/C NOT USED NOT USED STRT AUX SRCE AUX STATUS DIS. COL. Value Range Default Value Brief Description of Function and Comments 0/1 0/1 0/1 20 - 169 186 - 227 1 0 0 94 207 When set to 0, limits direct access to favorite channels. communication parameter. 0/1 1 Set to 1 to enable the front AUX (Camport) input. 0/1 1 Set to 1 to enable the rear S-Video input. 0/1 1 Set to 1 to automatically switch to Camport. 0/1 0 Set to 1 to automatically switch to rear S-Video input. 0 - 2, 255 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0-7 0-7 0/1 0-7 0-7 0/1 0-7 0-7 0/1 255 0 0 0 0 0 0 0 0 6 4 0 1 7 0 4 7 0 Set the starting AUX source Set to 1 for M. P. I. AUX source reported as Channel number instead of Channel 0. MUTE TIME 0 - 255 0 - 255 0 - 255 0 - 255 0/1 0-5 0/1 0 - 254 0 - 254 255 255 255 255 0 0 0 50 50 User programmable number, most significant byte. (Line - Day) User programmable number, most significant byte - 1. (Week) User programmable number, most significant byte - 2. (SN-HIGH) User programmable number, least significant byte. (SN-LOW) Enforces rigid M. P. I. * checksum. timing to be compatible with PC based Windows controlled systems. Remove block hours setting for Parental Control and make blocks permanent. Controls muting audio delay time when switching between AUX sources. Controls muting video delay time when switching between AUX sources. 0/1 0 When set to 1, XDS display program information will not appear. Detailed Descriptions of Installer Menu Items 0-I. INSTALLER SEQUENCE Gives access to Installer Menu depending on the code selected. [. . . ] On more than one speaker, all the speakers play the same audio. Multiple Protocol Interface: Zenith protocol for external control of TV through RJ11 (M. P. I. ) input jack on TV connections panel. jack is used for cloning TV's features. ) Refers to the jack that sends a signal out of a VCR, DVD, or other A/V device. 300 TO 75 OHM ADAPTER A/V DEVICE ADD AMPLIFIER ANTENNA AUTO PROGRAM DELETE INPUT JACK MONO SOUND M. P. I. OUTPUT 2ND AUDIO Second Audio Programming (SAP) is another, separate, audio channel PROGRAMMING/SAP Available with some programming. Choosing SAP often refers to listening to audio in another language, such as Spanish or French. [. . . ]