User manual SONY KDL-32EX709

[. . . ] Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. [. . . ] Check the website below for updated information about compatible USB devices. http://support. sony-europe. com/TV/compatibility/ Using Optional Equipment Playing Back Photo/ Music via USB You can enjoy photo/music files stored in a Sony digital still camera or camcorder through a USB cable or USB storage media on your TV. Using control for HDMI The control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings. 1 2 3 4 Connect a supported USB device to the TV. Press F/f to select "Photo / Music, " then press . Press F/f/G/g to select a file or folder, then press . When you select a folder, select a file, then press . Playback starts. To make the control for HDMI settings The control for HDMI settings must be set on both the TV side and connected equipment side. See "HDMI Set-up" on page 25 for the TV side settings. For settings on the connected equipment, refer to the operating instructions for that equipment. ~ Control for HDMI functions · Turns the connected equipment off interlocked with the TV. · Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play. · Picture quality may appear coarse when using "Photo" because images may be enlarged depending on the file. Also, images may not fill the entire screen depending on the image size and aspect ratio. "Cool": Gives the white colours a blue tint. "Neutral": Gives the white colours a neutral tint. "Warm": Gives the white colours a red tint. z · "Warm" can not be selected when you set "Picture Mode" to "Vivid". Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. "High/Medium/Low": Modifies the effect of the noise reduction. "Off": Turns off the "Noise Reduction" feature. Customizes the Picture function in more detail. When you set "Picture Mode" to "Cinema" or "Standard", you can set/change these settings. "MPEG Noise Reduction": Reduces the picture noise in MPEG-compressed video. "Live Colour": Makes colours more vivid. Advanced Settings 22 GB Reset ~ Resets all "Picture Adjustment" settings except "Picture Mode" and "Display Mode" (only in PC mode) to the factory settings. · "Brightness", "Colour", "Hue" and "Sharpness" are not available when "Picture Mode" is set to "Vivid" or when "Display Mode" is set to "Text". · "Noise Reduction" is not available when "Picture Mode" is set to "Photo" or when "Display Mode" is set to "Text" or "Photo". · "Advanced Settings" is not available when "Picture Mode" is set to "Vivid" or "Photo" or when "Display Mode" is set to "Text" or "Photo". Sound Adjustment Sound Effect Selects the sound mode. [. . . ] Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes · Select "Reset" (page 23). No colour or irregular colour when viewing a signal from the COMPONENT IN sockets · Check the connection of the COMPONENT IN sockets and check if each sockets are firmly seated in their respective sockets. General The TV turns off automatically (the TV enters standby mode) · Check if the "Sleep Timer" (page 24) or "Idle TV Standby" (page 24) is activated. · If no signal is received and no operation is performed in the TV mode for 15 minutes, the TV automatically switches to standby mode. [. . . ]