User manual SONY KDL-32EX710

[. . . ] answers to a quiz). 5 6 OPTIONS (24)(39) Enables you to access various viewing options and change/make adjustments according to the source and screen format. 7 HOME (47) 8 Coloured buttons (18)(28) 4/82 Overview of the remote 9 Number buttons · In TV mode: Selects channels. For channel numbers 10 and above, press the second and third digit in quick succession. · In Text mode: Enters the three digit page number to select the page. [. . . ] · Standard: For standard picture. · "Picture Mode" is set depending on "Scene Select" settings. · "Vivid" and "Standard" are available when "General" is selected in "Scene Select" mode. Backlight Adjusts the brightness of the backlight. · Reducing the brightness of the screen, the power consumption will be reduced. Contrast Increases or decreases picture contrast. Brightness Brightens or darkens the picture. Colour Increases or decreases colour intensity. 52/82 Picture Hue Increases or decreases the green tones and red tones. · "Hue" can only be adjusted for an NTSC colour signal (e. g. , U. S. A. Sharpness Sharpens or softens the picture. Colour Temperature Adjusts the whiteness of the picture. · Stereo, Mono: For a stereo broadcast. · A/B/Mono: For a bilingual broadcast, select "A" for sound channel 1, "B" for sound channel 2, or "Mono" for a mono channel, if available. · If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B". Auto Volume Keeps a constant volume level even when volume level gaps occur (e. g. , adverts tend to be louder than programmes). Volume Offset Sets an independent volume level to each equipment connected to the TV. 57/82 Sound Speaker Turns on/off the TV's internal speakers. · TV Speaker: The TV speakers are turned on in order to listen to the TV's sound through the TV speakers. · Audio System: The TV speakers are turned off in order to listen to the TV's sound only through your external audio equipment connected to the audio output sockets. PC Audio Input Selects the sound from the connected equipment HDMI 1 (33) (DVI-HDMI) or PC (35). Advanced Settings · Dynamic Range: Compensates for differences in the audio level between different channels (only for Dolby Digital audio). · The effect may not function or may vary depending on the programme regardless of the "Dynamic Range" setting. · Optical Out: Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. [. . . ] - Off: The time is displayed according to the time difference set by "Time Zone". 76/82 Set-up · When "Cable" is selected this function may not be available in some countries. · Service Replacement: Select "On" to automatically change the channel when broadcaster changes transmission of the viewing programme to a different channel. CA Module Set-up Allows you to access a pay TV service once you obtain a Condition Access Module (CAM) and a view card. See (31) for the location of the (PCMCIA) socket. 77/82 Troubleshooting Picture No picture or no menu information from equipment connected to the scart connector · Press to display the connected equipment list, then select the desired input. [. . . ]