User manual SONY KDL-32S2530 annexe 1

[. . . ] S Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business. S This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed. S Some Digital TV functions may not be available in some countries/areas and DVB-C cable may not operate correctly with some providers. S The illustrations used in this manual are of the KDL-40V4000 unless otherwise stated. [. . . ] You can listen to TV sound through headphones. Turn on the connected equipment, and perform one of the following operations. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead To return to single picture mode The picture framed in green is audible. You can switch the audible picture by pressing G/g. To view two pictures simultaneously ­ PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 21), and make sure that images from the PC appear on the screen. The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing F/f. If you have set an input source to "Skip" in the "AV Preset" menu (page 30), that input source does not appear in the list. The picture from the connected PC is displayed in full size, and the TV programme is displayed in the small screen. You can use F/f/G/g to change the position of the TV programme screen. To return to single picture mode To view two pictures simultaneously ­ PAP (Picture and Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. Using Menu Functions * This function may not be available in some countries/areas. To view pictures from an external input, select the input source, then press . Picture Mode Sets a picture mode when displaying an input other than a PC. the options for "Picture Mode" may differ depending on the "Video/Photo" setting (page 28). When you select "Shop" (or "Home") in step 5 of the initial set-up (page 7), "Picture Mode" is set to "Vivid" (or "Standard"). "Hue" can be adjusted only for the NTSC colour signal (e. Cool Neutral Warm 1/Warm 2 Gives white colours a blue tint. "Warm 2" gives a redder tint than "Warm 1". "Warm 1" and "Warm 2" are not available when "Picture Mode" is set to "Vivid". sharpness Noise Reduction Sharpens or softens the picture. Reduces the noise level of pictures (snowy pictures) when the broadcast signal is weak. [. . . ] Design and specifications are subject to change without notice. This TV's PC input does not support Sync on Green or Composite Sync. This TV's PC input does not support interlaced signals. This TV's PC input supports signals in the above chart with a 60 Hz vertical frequency. [. . . ]