User manual SONY KDL-37BX401

[. . . ] 4-208-253-12(1) LCD Digital Colour TV Operating Instructions KDL-37BX401 / 32BX301 NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] Press F/f to select "Photo", "Music", or "Video", then press . The file or folder list appears. Press F/f/G/g to select a file or folder, then press . When you select a folder, select a file, then press . Playback starts. Horizontal Shift (in See page 26. PC input mode only) Vertical Shift (in PC input mode only) Sleep Timer (except PC input mode) Power Saving See page 26. ~ · Picture quality may appear coarse when using "Photo" because images may be enlarged depending on the file. Also, images may not fill the entire screen depending on the image size and aspect ratio. · Some photo files may take some time to be displayed when using "Photo". · The file name and folder name support the UTF-8 character set. · While the TV is accessing the data on the USB device, observe the following: ­ Do not turn off the TV or connected USB device. The data on the USB device may be damaged. · Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV. · USB playback is supported for the following photo file formats: ­ JPEG (JPEG format files with the extension ". jpg" and conforming to DCF 2. 0 or Exif 2. 21) · When you connect a Sony digital still camera, set the camera's USB connection mode to Auto or "Mass Storage". For more information about USB connection mode, refer to the instructions supplied with your digital camera. · USB playback is supported for the following music file formats: ­ MP3 (files with the extension ". mp3" that have not been copyrighted) · USB playback is supported for the following video file format: ­ MPEG1, MPEG2 (files with the extension ". mpg") ­ MP4 (files with the extension ". mp4") ­ DivX (files with the extension ". avi" or ". mkv") · USB Photo Viewer supports FAT16 and FAT32 file systems. · Up to 300 files per folder are supported. · Depending on the exact file specifications, some files, including those modified on a PC, cannot be played even if the file format is supported. 20 GB · Check the website below for updated information about compatible USB devices. http://support. sony-europe. com/TV/compatibility/ To display a photograph ­ Picture Frame You can display a photograph on the screen for a selected period of time. After that period, the TV automatically switches itself into standby mode. Using BRAVIA Sync with Control for HDMI The Control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with Control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings. Control for HDMI · Automatically turns the connected equipment off when you switch the TV to standby mode using the remote. · Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play. · If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system. [. . . ] Picture or sound noise when viewing a TV channel · Adjust "AFT" (Automatic Fine Tuning) to obtain better picture reception (page 28). Some tiny black points and/or bright points appear on the screen · The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes · Select "Reset" (page 24). [. . . ]