User manual SONY KDL-37L4000

[. . . ] 3-700-289-11(1) LCD Digital Color TV Operating Instructions KDL-32L4000 KDL-37L4000 © 2008 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV. CAUTION To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted. Safety s s Operate the TV only on 120-240 V AC. Use the AC power cord specified by Sony and suitable for the voltage where you use it. [. . . ] For details, see "Using the Picture Settings" on page 25. Press to go back to the previous screen when displaying MENU items and settings. Press to display the MENU with TV functions and settings. See "Overview of MENU" on page 25. Press to turn on and off Closed Captions (CC). To change or customize CC Display, see page 34. Use with 0-9 and ENT buttons to select digital channels. For example, to enter 2. 1, press 2 , , 1 and ENT. Press again or press VOL + to restore the sound. 5 6 7 4 PICTURE 8 9 5 RETURN 6 MENU 0 7 CC 8 9 VOL +/­ 0 MUTING z The 5 button and CH + have a tactile dot. Use them as a reference when operating the TV. (Continued) 21 Basic Operations Button Description qa qs qa POWER qs WIDE Press to turn on and off the TV. Press repeatedly to step through the Wide Mode settings: Wide Zoom, Normal, and Full. The Wide Mode settings can also be accessed in the Screen settings. (See page 27. ) Changing the Wide Screen Mode (For PC timing, see below) 4:3 Original source Standard definition source 16:9 Original source High definition source m Wide Zoom m Wide Zoom Normal Normal This mode is not available Full Full Normal is not available when you are watching a 720p or 1080i source from a component video input or a 720p, 1080i or 1080p source from an HDMI input or a digital TV. Changing the Wide Screen Mode for PC Timing Incoming PC signal Incoming PC signal 800 × 600 1280 × 768 m Normal m Normal Full 1 Full 1 Full 2 Full 2 22 Basic Operations Button Description qd INPUT Press to display the list of external inputs. Press repeatedly to toggle through the inputs. Inputs can be changed by pressing V/v and while the list of external inputs is displayed. Basic Operations See page 33 for information about setting up the external inputs labels, including the Skip feature. Press V/v/B/b to move the on-screen cursor. Press to display the Tools Menu that is associated with your current input: analog TV, digital TV or external inputs. (See pages 25, 26, and 34) Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected. Press 0 - 9 to select a channel; the channel changes after two seconds. [. . . ] Keep the remote control sensor area clear from obstacles. Certain cable companies have limitations on the broadcast of digital cable channels. Check with your cable company for more information. The digital cable channel may be set to Hidden in the Show/Hide Channels setting (see page 29). [. . . ]