User manual SONY BRAVIA KDL-37L5000

[. . . ] SU-WL500 WS-S10LS SU-FL71M ­ Model Name Serial No. CAUTION To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted. s Operate the TV only on 120 V AC. Use with other WALL-MOUNT BRACKETS or TV stands may cause instability and possibly result in injury. Blu-ray Disc is a trademark. "BRAVIA" and , S-Force, Motionflow, BRAVIA Sync, , DMex, MICRO VAULT, and "x. v. Color" are trademarks or registered marks of Sony Corporation. [. . . ] Keyword search can be done by type, category or subcategory of a program. Highlight SEARCH on the Service Bar, press then press B/b to highlight KEYWORD. Press again or press OPTIONS to display Keyword Options in the Panel Menu. Select new search to narrow your search by type, category or subcategory by pressing V/v/B/b. Highlight SETUP on the Service Bar then press v to highlight the available options to customize your system settings. You can change system settings, change channel display, change default options, display setup progress and diagnostics information. Keyword search Customizing the TV Guide On Screen system settings Change channel display Highlight SETUP on the Service Bar then press v to highlight the Change channel display then press . Highlight a channel then press OPTIONS to display the Grid Options. Make the changes using V/v and/or 0-9 buttons. When the changes are made, select done and press . The Grid Options can also be used to re-sort the channel display numerically. Display the Grid Options and select re-sort numerically then press . · Available DIGITAL MEDIA PORT adapters vary in each area. · Do not connect an adapter other than the DIGITAL MEDIA PORT adapter. · If the portable player is capable of sending video signals, then the DIGITAL MEDIA PORT will have video output. In this case, the system outputs a composite video signal. · Check compatibility between portable player and the DIGITAL MEDIA PORT adapter. · The output volume level between the DMPORT input and TV or other equipment input may be significantly different; adjusting the TV or other equipment's volume may be necessary. ~ · The A/V receiver cannot be selected from the XMBTM. 36 Using P&P and PIP Features This TV comes with the P&P and PIP features which allow you to view two pictures simultaneously. P&P (picture and picture) provides two windows side by side. PIP (picture in picture) provides PC input signal and TV channels. ~ · To swap audio in P&P mode, use the B/b button to swap the highlight between the Main Window and Sub Window. · To swap audio in PIP mode, press OPTIONS, then press V/v to highlight Audio Swap. · For compatible PC Timings, refer to the PC Input Signal Reference Chart (see page 14). ~ · The CABLE/ANTENNA input must be connected to use the P&P/PIP features. · P&P is not available with 1080/24p video format. [. . . ] These signal compressions are more visible and are dependent fast-motion or dark scenes on the clarity and resolution of the TV. Remote control does not · To determine if the problem is with the remote control or not, press a button on the TV. operate · Check the polarity of the batteries or replace the batteries. · Point the remote control at the remote control sensor located at the front of the TV. [. . . ]