User manual SONY KDL-37V4000 annexe 1

[. . . ] Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] When "Control for HDMI" compatible equipment is connected, communication with the connected equipment is supported. Z It is recommended to use a PC cable with ferrites, such as the "Connector, D-sub 15" (ref. (CAM) 0 To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot. When the input source is set to "Skip" in the "AV Preset" menu under the "Set-up" menu (page 24), that input does not appear in the list. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN socket through a DVIHDMI adaptor interface (not supplied), and connect the equipment's audio out socket to the audio in HDMI IN socket (page 24). Press TOOLS to display the following options when viewing pictures from connected equipment. You can perform interlocked control operations between Sony "Control for HDMI" compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables. Be sure to correctly connect and set the compatible equipment to use the "Control for HDMI" function. When connecting an audio system, in addition to the HDMI cable, be sure to also of the TV and connect the audio output socket the audio system. "Control for HDMI" must be set on both the TV side and the connected equipment side. You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 16), and make sure that images from a PC appear on the screen. ~ You cannot display resolutions higher than WXGA (1280 × 768 pixels). Turns the connected equipment off interlocked with the TV. Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play. If you turn on a connected audio system while the TV is on, the input switches to the audio from the audio system. The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner. You can use F/f/G/g to move the TV programme screen position. To return to single picture mode Press RETURN. You can switch the audible picture by selecting "PC Sound/TV Sound" from the Tools menu. [. . . ] Power Requirements: 220­240 V AC, 50 Hz Screen Size: KDL-37xxxxx: 37 inches KDL-32xxxxx: 32 inches KDL-26xxxxx: 26 inches Display Resolution: 1, 366 dots (horizontal) × 768 lines (vertical) Power Consumption*: KDL-37S4xxx/ KDL-37U4xxx/ KDL-37V4xxx: 123 W (Home / Standard mode) 155 W (Shop / Vivid mode) KDL-32S4xxx/ KDL-32U4xxx/ KDL-32V4xxx: 101 W (Home / Standard mode) 129 W (Shop / Vivid mode) KDL-26S4xxx/ KDL-26U4xxx/ KDL-26V4xxx: 69 W (Home / Standard mode) 87 W (Shop / Vivid mode) * For details about "Home mode" or "Shop mode" see page 6. 7 W or less * Specified standby power is reached after the TV finishes necessary internal processes. - KDL-37S40xx/ KDL-32S40xx/ KDL-37U40xx/ KDL-32U40xx/ KDL-37V40xx/ KDL-37V42xx/ KDL-32V40xx/ KDL-32V42xx: TV stand SU-FL300M Design and specifications are subject to change without notice. This TV's PC input does not support Sync on Green or Composite Sync. [. . . ]