User manual SONY KDL-40D2710

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] When HDMI control compatible equipment is connected, communication with the connected equipment is supported. When connecting an audio system with HDMI socket, be sure to also connect to the HiFi socket. Press TOOLS to display the following options when viewing pictures from connected equipment. You can perform interlocked control operations between Sony HDMI control compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables. Be sure to correctly connect and set the compatible equipment to use the HDMI control function. When connecting an audio system, in addition to the HDMI cable, be sure to also connect of the TV and the audio the audio output socket system. HDMI control must be set on both the TV side and the connected equipment side. You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 16), and make sure that images from a PC appear on the screen. ~ You cannot display resolutions higher than WXGA (1280 × 768 pixels). Turns the connected equipment off interlocked with the TV. Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play. If you turn on a connected audio system while the TV is on, the input switches to the audio from the audio system. The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner. You can use F/f/G/g to move the TV programme screen position. To return to single picture mode Press RETURN. You can switch the audible picture by selecting "PC Sound/ TV Sound" from the Tools menu. "MENU" allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. To watch the desired external input, select the input source, then press . Displays the Settings menu where most of the advanced settings and adjustments are performed. Unavailable options are greyed out or not displayed. [. . . ] "On": Automatically switches between summer time and winter time according to the calendar. "Off": The time is displayed according to the time difference set by "Time Zone". Allows you to access a pay TV service once you obtain a Conditional Access Module (CAM) and a view card. Power Requirements: 220­240 V AC, 50 Hz Screen Size: KDL-40xxxxx: 40 inches KDL-32xxxxx: 32 inches Display Resolution: 1, 366 dots (horizontal) × 768 lines (vertical) Power Consumption: KDL-40xxxxx: 170 W or less KDL-32xxxxx: 150 W or less Standby Power Consumption*: 0, 6 W or less * Specified standby power is reached after the TV finishes necessary internal processes. [. . . ]