User manual SONY KDL-40D2810

[. . . ] For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. [. . . ] However, not all models of every brand may be covered. To control BDs and DVDs of other manufacturers (and some other Sony BD, DVD and AMP models), do the following procedure to programme the remote. ~ Before you start, look up the three-digit code for your brand of BD, DVD or AMP from the "Manufacturer's codes" on page 24. You can view photographs (in JPEG format) stored in a Sony digital still camera, camcorder or USB storage media on your TV. You can connect Sony HDMI control compatible equipment such as TVs, hard disk DVD recorders and audio systems (with HDMI cables) to let them work integratedly. Be sure to correctly connect and set the compatible equipment to use the HDMI control function. Press F/f/G/g to select the photograph or folder you want to view, and then press . If you want to view a slide show, press G/f to select "Slide Show", then press . When connecting an audio system, in addition to the HDMI cable, be sure to also connect the DIGITAL OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable. You can make "Backlight" (page 28), "Contrast" (page 28) and "Colour Temperature" settings. You can make advanced settings for the slide show and set the display sequence for the thumbnails. "Cool": Gives the white colours a blue tint. "Warm 2" gives a redder tint than "Warm 1". z "Warm 1" and "Warm 2" are not available when "Picture Mode" is set to "Vivid". Reduces the picture noise (snowy picture) in a weak broadcast signal. , Blu-ray disc player, DVD player, satellite receiver). "Mode 2" is especially effective when original standard-definition signals have been up-converted to 1080i format. Customizes the level of detail ("Reality") and smoothness ("Clarity") for each input signal. For example, you can create a custom setting for your cable input's picture, and create another for your DVD player's pictures. As you move the z higher along the "Reality" axis, the picture becomes more detailed. As you move the z to the right along the "Clarity" axis, the picture becomes smoother. When you set "Picture Mode" to "Vivid", you cannot set/change these settings. [. . . ] "Auto DST": Sets whether or not to automatically switch between summer time and winter time. "Off": The time is displayed according to the time difference set by "Time Zone". "On": Automatically switches between summer time and winter time according to the calendar. Allows you to access a pay TV service once you obtain a Conditional Access Module (CAM) and a view card. [. . . ]